Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology
X Shuai, Y Zeng, P Li, J Chen - Journal of Materials Science, 2020 - Springer
This paper proposed a method for preparing subtle and complex lattice structure Al 2 O 3
ceramic via digital light processing (DLP) 3D printing technology. The solid-phase mass …
ceramic via digital light processing (DLP) 3D printing technology. The solid-phase mass …
Ni interlayer induced strengthening effect in alumina/alumina joint bonded with Ti/Cu/Ni/Cu/Ti composite foils
In this work, alumina ceramic was bonded to itself with composite foils (Ti/Cu/Ni/Cu/Ti). The
thermodynamics analysis indicates that Ti-Cu liquid firstly formed and reacted with alumina …
thermodynamics analysis indicates that Ti-Cu liquid firstly formed and reacted with alumina …
Induction brazing of Al2O3 ceramic and 316L stainless steel with Sn–Ti filler alloy
An induction brazing method for joining Al 2 O 3 ceramic to 316L stainless steel (SS) was
developed in this study. The Sn–Ti alloy was rapidly melted by induction heating, which …
developed in this study. The Sn–Ti alloy was rapidly melted by induction heating, which …
Microstructural evolution during fabrication of alumina via laser stereolithography technique
Application of additive manufacturing (AM) technology in production of ceramic parts is
considered as a state-of-the-art technique which has been recently introduced to industry. In …
considered as a state-of-the-art technique which has been recently introduced to industry. In …
Microstructure evolution and mechanical properties of titanium/alumina brazed joints for medical implants
Medical titanium and alumina (Al2O3) bioceramic are widely utilized as biomaterials. A
reliable brazed joint of titanium and alumina was successfully obtained using biocompatible …
reliable brazed joint of titanium and alumina was successfully obtained using biocompatible …
Bonding mechanism study of active Ti element and α-Al2O3 by using first-principle calculation
H Xue, X Wei, W Guo, X Zhang - Journal of Alloys and Compounds, 2020 - Elsevier
Ti is an important active element in Ag-based and Sn-based filler metals to join α-Al 2 O 3.
Therefore, the bonding mechanism of Ti and Al 2 O 3 was studied by using first principle …
Therefore, the bonding mechanism of Ti and Al 2 O 3 was studied by using first principle …
Reactive air brazing of Al2O3 ceramic with Ag-CuO-Pt composite fillers: microstructure and joint properties
The effect of Pt content dispersed in Ag-CuO fillers on the interfacial microstructure and
properties of Al 2 O 3 ceramic joints brazed in air was investigated. Pt addition did not …
properties of Al 2 O 3 ceramic joints brazed in air was investigated. Pt addition did not …
[HTML][HTML] Revealing the mechanism of abruptly dropping of the wetting angle for the cast iron and zirconia ceramic system
Z Zhao, Y Li, Q Zheng, D Yi, H Cheng, S Zhang - Materials & Design, 2024 - Elsevier
The wettability behavior and characteristics of the high chromium cast iron (HCCI)/zirconium
dioxide system were studied using the sessile drop method. A complete and uniform layer of …
dioxide system were studied using the sessile drop method. A complete and uniform layer of …
Diffusion bonding of implantable Al2O3/Ti-13Nb-13Zr joints: Interfacial microstructure and mechanical properties
In this study, implantable Al 2 O 3/Ti-13Nb-13Zr (TNZ) alloy joints were achieved by diffusion
bonding. The effects of bonding temperature and holding time on interfacial microstructure …
bonding. The effects of bonding temperature and holding time on interfacial microstructure …
Interactions, joining and microstructure of Sn-Ti/ZrO2 system
Brazing and soldering following pre-metallization were employed to obtain reliable ZrO 2/Sn-
Ti/ZrO 2 joints. Both the metallization and brazing depend on the wettability of ZrO 2 by Sn-Ti …
Ti/ZrO 2 joints. Both the metallization and brazing depend on the wettability of ZrO 2 by Sn-Ti …