This article reviews original work and important new developments in the field of
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …

Strength properties of annealed austenitic stainless steels are relatively low and therefore
improvements are desired for constructional applications. The reversion of deformation …

Understanding the relationship between the stacking-fault energy (SFE), deformation
mechanisms, and strain-hardening behavior is important for alloying and design of high-Mn …

The aim of this work is to investigate the effects of Selective Laser Melting (SLM) on the
microstructure and mechanical properties of A357 aluminium alloys. The SLM processing …

A twinning-induced plasticity (TWIP) steel was processed by warm rolling with different
reduction ratios to elevate yield strength while maintaining considerable ductility. To …

The stacking-fault energy (SFE), dislocation slip, mechanical twinning, strain hardening, and
yield and tensile strengths were systemically investigated in Fe–18Mn–0.6 C–1.5 Si …

The influence of grain size on the twinning stress of an Fe–15Mn–2Al–2Si–0.7 C Twinning
Induced Plasticity (TWIP) steel has been investigated. Five grain sizes were obtained using …

We investigate the influence of grain size on the strain hardening of two Fe–22Mn–0.6 C
(wt.%) twinning-induced plasticity steels with average grain sizes of 3 and 50μm …

The mechanism of {332}〈 113〉 twinning-induced plasticity in a Ti–15Mo alloy was
investigated through quantitative evaluation of twinning structure evolution at various tensile …

High manganese twinning-induced plasticity (TWIP) steel is a new kind of structural material
and possesses both high strength and superior plasticity and can meet the weight-lightening …