Thick-section composite parts are difficult to manufacture using thermosetting resins due to
their exothermic curing reaction. If processing is not carefully controlled, the build-up of heat …

Epoxy powders were investigated as a processing route for fast, low-cost manufacturing of
thick-section fibre reinforced polymer parts. Thermogravimetric analysis (TGA), differential …

Validations of a one-dimensional process model are carried out by manufacturing thick-
section glass-fibre reinforced composite laminates with a low-exotherm epoxy powder. An …

A resin flow model for vacuum-bag-only prepregs is coupled with heat transfer in a
commercially available finite element software. The coupled model simulates the processing …

Email: e. pappa@ ed. ac. uk, Web Page: www. eng. ed. ac. uk 2ÉireComposites Teo, An
Choill Rua, Indreabhán Co. Galway H91Y923 Ireland Email: a. doyle@ eirecomposites …

Современные полимерные композиционные материалы (ПКМ) применяются в
качестве конструкционных материалов при производстве большого ассортимента …

Manufacturing thick-section structures from thermoset-based composites can be challenging
due to the exothermic curing reaction. With a low thermal conductivity through the thickness …