The advent of soft lithography allowed for an unprecedented expansion in the field of
microfluidics. However, the vast majority of PDMS microfluidic devices are still made with …

This paper describes a procedure that makes it possible to design and fabricate (including
sealing) microfluidic systems in an elastomeric material poly (dimethylsiloxane)(PDMS) in …

Microfluidic automation–the automated routing, dispensing, mixing, and/or separation of
fluids through microchannels–generally remains a slowly-spreading technology because …

This paper describes a procedure for rapidly and conveniently prototyping microfluidic
devices that are useful with aqueous solutions. A design (with diameters of channels 20 µm) …

A new plastic imprinting method using a silicon template is demonstrated. This new
approach obviates the necessity of heating the plastic substrate during the stamping …

Bistable diverter valves are useful for a large number of no-moving-part flow control
applications, and there is a considerable interest in using them also in microfluidics …

Microfluidic oscillators were obtained from wall attachment microfluidic amplifiers using a
feedback loop from the outputs to the control inputs. These devices can be used as flow …

In this work, we demonstrate a rapid protocol to address one of the major barriers that exists
in the fabrication of chip devices, creating the micron-sized structures in the substrate …

Abstract Die Entwicklung der weichen Lithographie hat den Weg bereitet für große
Fortschritte auf dem Gebiet der Mikrofluidik. Allerdings ist die Fertigung und der Betrieb von …

An asymmetric micro-oscillator design based on a monostable fluidic amplifier is proposed.
Experimental data with various feedback loop configurations point out that the main effect …