Abrasion wear of austenitic manganese steels via jaw crusher test
The abrasion wear of the austenitic manganese steels with 12% Mn and 20% Mn was
evaluated via jaw crusher tests. The abrasive mass (ie gravel) used per test was 100 kg and …
evaluated via jaw crusher tests. The abrasive mass (ie gravel) used per test was 100 kg and …
Effect of Al content on the low-stress abrasive wear behaviour of Fe-18Mn-xAl-0.7 C alloys
JS Rodríguez, JF Duran, Y Aguilar, GAP Alcazar… - Tribology …, 2023 - Elsevier
The low-stress ASTM-G65 abrasive wear behaviour was studied in a system of high
manganese steels Fe-18Mn-xAl-0.7 C with aluminium contents of 0%, 3%, 6% and 9.5% by …
manganese steels Fe-18Mn-xAl-0.7 C with aluminium contents of 0%, 3%, 6% and 9.5% by …
Failure analysis of a crossing rail made of Hadfield steel after severe plastic deformation induced by wheel-rail interaction
In this study, the sub-surface structure of a railroad crossing made of Hadfield steel was
characterized. The microhardness profile and metallographic examination, in addition to …
characterized. The microhardness profile and metallographic examination, in addition to …
Fractal and multifractal analysis of fracture surfaces caused by hydrogen embrittlement in high-Mn twinning/transformation-induced plasticity steels
A fracture surface is very important evidence in failure analysis after a material fractures
under the combined actions of load and environment. In this work, we used field-emission …
under the combined actions of load and environment. In this work, we used field-emission …
High-strain-rate deformation behaviour of new high-Mn austenitic steel during impact shock-loading
M Eskandari, MA Mohtadi-Bonab… - Materials Science …, 2019 - journals.sagepub.com
The influence of impact shock-loading was investigated on the mechanical behaviour,
microstructure evolution, and texture of a new high-Mn steel. The mechanical behaviour of …
microstructure evolution, and texture of a new high-Mn steel. The mechanical behaviour of …
Termination of negative strain-rate sensitivity by nanotwin formation in TWIP steel micropillars
D Canadinc - Philosophical Magazine Letters, 2020 - Taylor & Francis
Strain-rate sensitivity (SRS) of high-Mn austenitic steels at the micrometric scale was
investigated. Compressive-deformation response of TWIP steel micropillars demonstrated …
investigated. Compressive-deformation response of TWIP steel micropillars demonstrated …
Deformation relief on the surface of Hadfield steel single crystals, observed using a scratch test
DV Lychagin, AV Filippov, AV Kolubaev… - AIP Conference …, 2018 - pubs.aip.org
The development of deformation relief on the surface of Hadfield steel single crystals is
investigated using the method of scratching with a linearly increasing load. The orientation …
investigated using the method of scratching with a linearly increasing load. The orientation …