An overview of using small punch testing for mechanical characterization of MCrAlY bond coats
Considerable work has been carried out on overlay bond coats in the past several decades
because of its excellent oxidation resistance and good adhesion between the top coat and …
because of its excellent oxidation resistance and good adhesion between the top coat and …
Thermo-Calc and DICTRA modelling of the β-phase depletion behaviour in CoNiCrAlY coating alloys at different Al contents
H Chen, T Barman - Computational Materials Science, 2018 - Elsevier
The β-phase depletion kinetics in MCrAlY coating alloys at different Al contents has been
investigated by diffusion simulations and comparing with available experimental data. The …
investigated by diffusion simulations and comparing with available experimental data. The …
An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy
H Chen, YQ Si, DG McCartney - Journal of Alloys and Compounds, 2017 - Elsevier
This paper investigates the β-phase coarsening behaviour during isothermal heat treatment
of free-standing CoNiCrAlY (Co-31.7% Ni-20.8% Cr-8.1% Al-0.5% Y, all in wt%) coatings …
of free-standing CoNiCrAlY (Co-31.7% Ni-20.8% Cr-8.1% Al-0.5% Y, all in wt%) coatings …
Some aspects on modelling of the β-phase depletion behaviour under different oxide growth kinetics in HVOF CoNiCrAlY coatings
H Chen, DG McCartney - Surface and Coatings Technology, 2017 - Elsevier
In this paper, β-phase depletion behaviour of free-standing high velocity oxy-fuel (HVOF)
thermally sprayed CoNiCrAlY coatings was studied. Microstructural analysis showed a two …
thermally sprayed CoNiCrAlY coatings was studied. Microstructural analysis showed a two …
Modelling and experimental study on β-phase depletion behaviour of HVOF sprayed free-standing CoNiCrAlY coatings during oxidation
This paper investigates the β-phase depletion behaviour during oxidation of free-standing
CoNiCrAlY (Co–31.7% Ni–20.8% Cr–8.1% Al–0.5% Y, all in wt.%) bond coats prepared by …
CoNiCrAlY (Co–31.7% Ni–20.8% Cr–8.1% Al–0.5% Y, all in wt.%) bond coats prepared by …
Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition
This paper investigates the microstructure evolution of Al-TiB2 coatings prepared by cold
spraying. In situ Al-TiB2 composite powders containing uniformly distributed titanium …
spraying. In situ Al-TiB2 composite powders containing uniformly distributed titanium …
Novel U-bending designed setups for investigating the spring-back/spring-go of two-layer aluminum/copper sheets through experimental tests and finite element …
This paper presents novel U-bending setups in order to investigate the effects of the
curvatures created on the punch, die, or both on the spring-back/spring-go of the two-layer …
curvatures created on the punch, die, or both on the spring-back/spring-go of the two-layer …
Application of Precipitate Free Zone Growth Kinetics to the β-Phase Depletion Behavior in a CoNiCrAlY Coating Alloy: An Analytical Approach
H Chen - Metallurgical and Materials Transactions A, 2018 - Springer
This paper concerns the β-phase depletion kinetics of a thermally sprayed free-standing
CoNiCrAlY (Co-31.7 pct Ni-20.8 pct Cr-8.1 pct Al-0.5 pct Y, all in wt pct) coating alloy. An …
CoNiCrAlY (Co-31.7 pct Ni-20.8 pct Cr-8.1 pct Al-0.5 pct Y, all in wt pct) coating alloy. An …
Evaluation of the ductile-to-brittle transition temperature in a thermally sprayed CoNiCrAlY coating by small punch multi-step loading tests
H Chen, J Yang, XL Xiao - Proceedings of the Institution of …, 2017 - journals.sagepub.com
High velocity oxy-fuel thermal spraying was used to prepare free-standing CoNiCrAlY (Co–
31.7% Ni–20.8% Cr–8.1% Al–0.5% Y, all in wt%) coatings of an approximate thickness of …
31.7% Ni–20.8% Cr–8.1% Al–0.5% Y, all in wt%) coatings of an approximate thickness of …
[PDF][PDF] Novel U-bending designed setups for investigating the spring-back/spring-go of two-layer
E Etemadi, A Naseri, M Valinezhad - Mechanics, 2018 - researchgate.net
This paper presents novel U-bending setups in order to investigate the effects of the
curvatures created on the punch, die, or both on the spring-back/spring-go of the two-layer …
curvatures created on the punch, die, or both on the spring-back/spring-go of the two-layer …