Influence of iron on castability and properties of aluminium silicon alloys: literature review
TO Mbuya, BO Odera, SP Ng'ang'a - International Journal of Cast …, 2003 - Taylor & Francis
The castability and properties of Al—Si based foundry alloys are affected by the inevitable
introduction of impurity elements during melting and casting. Iron has consistently emerged …
introduction of impurity elements during melting and casting. Iron has consistently emerged …
A review on aluminum alloy conductors influenced by alloying elements and thermomechanical treatments: Microstructure and properties
J Zhang, J Peng - Journal of Materials Research, 2023 - Springer
The new all-aluminum alloy conductors gradually replace the steel core conductors and
develop rapidly and are widely used around the world in aerospace, construction …
develop rapidly and are widely used around the world in aerospace, construction …
The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: A multi-refinement modifier
Abstract Effect of scandium (Sc) additions on the microstructure, mechanical properties and
fracture behavior of Al–Si–Mg casting alloy (F357) were systematically investigated. It was …
fracture behavior of Al–Si–Mg casting alloy (F357) were systematically investigated. It was …
Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment
AM Samuel, J Gauthier, FH Samuel - Metallurgical and Materials …, 1996 - Springer
The dissolution and melting of Al 2 Cu phase in solution heat-treated samples of unmodified
Al-Si 319.2 alloy solidified at≈ 10° C were studied using optical microscopy, image …
Al-Si 319.2 alloy solidified at≈ 10° C were studied using optical microscopy, image …
Effect of iron content on the formation of β-Al5FeSi and porosity in Al–Si eutectic alloys
MA Moustafa - Journal of materials processing technology, 2009 - Elsevier
A preliminary investigation has been carried to evaluate the influence of Fe on Sr-modified
and unmodified eutectic Al–Si alloys in as-cast and heat treatment conditions. The castings …
and unmodified eutectic Al–Si alloys in as-cast and heat treatment conditions. The castings …
[HTML][HTML] In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
Real-time in situ synchrotron X-ray tomographic microscopy was used to gain new insights
into and quantify the nucleation mechanisms and growth kinetics of β-Al 5 FeSi …
into and quantify the nucleation mechanisms and growth kinetics of β-Al 5 FeSi …
Incipient melting of Al5Mg8Si6Cu2 and Al2Cu intermetallics in unmodified and strontium-modified Al–Si–Cu–Mg (319) alloys during solution heat treatment
FH Samuel - Journal of Materials Science, 1998 - Springer
The present work was performed on seven alloys containing in common Al–6.5 wt% Si–3.5
wt% Cu, with magnesium in the range 0.04–0.45 wt%, and strontium in the range 0–300 …
wt% Cu, with magnesium in the range 0.04–0.45 wt%, and strontium in the range 0–300 …
High-strength Al–5Mg2Si–2Mg–2Fe alloy with extremely high Fe content for green industrial application through additive manufacturing
Achieving superior mechanical properties of Al alloys with high content of Fe impurities is
very challenging. Here, a feasible method was applied to accommodate high Fe content (∼ …
very challenging. Here, a feasible method was applied to accommodate high Fe content (∼ …
The complex microstructures in an as-cast Al–Mg–Si alloy
YL Liu, SB Kang, HW Kim - Materials letters, 1999 - Elsevier
The microstructure and solidification process of an Al–Mg–Si alloy have been studied to
evaluate the formation of intermetallic compounds during slow solidification of a cooling rate …
evaluate the formation of intermetallic compounds during slow solidification of a cooling rate …
A crystallographic identification of intermetallic phases in Al–Si alloys
MV Kral - Materials letters, 2005 - Elsevier
Iron-rich intermetallic phases are well known to be strongly influential on mechanical
properties in Al–Si alloys. Two important phases have been previously designated as the …
properties in Al–Si alloys. Two important phases have been previously designated as the …