Steels for bearings
H Bhadeshia - Progress in materials Science, 2012 - Elsevier
A casual metallurgist might be forgiven in believing that there are but a few basic types of
steels used in the manufacture of some of the most technologically important engineering …
steels used in the manufacture of some of the most technologically important engineering …
The first bulk nanostructured metal
H Bhadeshia - Science and Technology of Advanced Materials, 2013 - iopscience.iop.org
Nanotechnology has become an overused adjective, but there has been justified excitement
in the context of structural materials. A class of iron alloys has been discovered in which a …
in the context of structural materials. A class of iron alloys has been discovered in which a …
An in situ investigation of neighborhood effects in a ferrite-containing quenching and partitioning steel: Mechanical stability, strain partitioning, and damage
Understanding the micromechanical consequences of transformation-induced plasticity
(TRIP)-assisted steels is challenging, due to the presence of multiple phase constituents and …
(TRIP)-assisted steels is challenging, due to the presence of multiple phase constituents and …
On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels
K Steineder, D Krizan, R Schneider, C Béal… - Acta Materialia, 2017 - Elsevier
This paper systematically investigated the influence of microstructural characteristics such
as grain size and morphology on the yielding behavior of a cold rolled medium-Mn Fe-6.4 …
as grain size and morphology on the yielding behavior of a cold rolled medium-Mn Fe-6.4 …
Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing
The mechanical behaviour of transformation-induced plasticity (TRIP)-assisted multiphase
steels is addressed based on three different microstructures generated from the same steel …
steels is addressed based on three different microstructures generated from the same steel …
Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels
MD Taylor, KS Choi, X Sun, DK Matlock… - Materials Science and …, 2014 - Elsevier
Nanoindentation measurements were obtained on eight commercially-produced DP980
dual-phase steels to quantify the hardness of the individual constituents, ferrite and …
dual-phase steels to quantify the hardness of the individual constituents, ferrite and …
Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel
In general, the medium Mn steel with a dual phase microstructure of austenite and ferrite has
a yield point phenomenon. It is still not clear which phase firstly initiates the plasticity and …
a yield point phenomenon. It is still not clear which phase firstly initiates the plasticity and …
Medium-alloy manganese-rich transformation-induced plasticity steels
The manganese concentration of steels which rely on transformation-induced plasticity is
generally less than 2 wt pct. Recent work has highlighted the potential for strong and ductile …
generally less than 2 wt pct. Recent work has highlighted the potential for strong and ductile …
Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation
Strain-induced martensitic transformation of metastable austenite was investigated by
nanoindentation of individual austenite grains in multi-phase steel. A cross-section prepared …
nanoindentation of individual austenite grains in multi-phase steel. A cross-section prepared …
Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels
S Zhang, KO Findley - Acta Materialia, 2013 - Elsevier
The stability of retained austenite (RA) in transformation-induced plasticity steels (TRIP) is
affected by many factors, including chemical composition, RA grain size, neighboring …
affected by many factors, including chemical composition, RA grain size, neighboring …