The asphalt industry has been under pressure to reduce its emissions. This can be
achieved, from one hand, by decreasing the mixing and laying temperatures of asphalt …

Use of Warm Mix Asphalt (WMA) technologies is known as an effective method to reducing
the energy consumption and emissions associated with conventional Hot Mix Asphalt (HMA) …

Fatigue cracks were observed in the 1800s in steel structures—bridge and railroad—in
Europe because of cyclic loading; since then, fatigue has been extensively studied in …

Asphalt concrete (AC) recycling is probably the most cost-effective technique for the
rehabilitation of stressed road pavements and for the construction of new ones. The …

The mechanical performance of a typical surface course mixture, modified with two different
plastic wastes, both via the wet and dry processes, was evaluated in this study. Water …

Fatigue strength is the core of pavement structure design. For semi-rigid base asphalt
pavement, the anti-fatigue design of cement stabilized macadam is the key to the entire …

Today recycling is one of the most innovative and interesting techniques for the
rehabilitation of destressed road pavements. In recent years the increased interest in this …

Four-point bending tests under strain-controlled mode were conducted on a stone matrix
asphalt. Fatigue properties were evaluated by comparing indexes and fatigue curves at …

Cold mixed epoxy asphalt mixture (CMEAM) is widely applied on steel deck bridge
pavements due to its excellent high temperature and fatigue resistance. However, previous …

Over recent years, the necessity of reducing the environmental impact of building new
infrastructures has increasingly directed research toward developing innovative …