This article deals with the difference in elasticity moduli of the three-and four-point bending
of spruce and oak wood. Theoretical analyses of both loading methods are given. The …

This study evaluated the mechanical properties of hybrid (mixed-species) cross-laminated
timber (CLT) panels made of low-value sugar maple (Acer saccharum) and white spruce …

The objective of this study is to examine the mechanical performance of cross laminated
timber (CLT) panels made of low-value sugar maple under out of plane loads through …

The objective of this study was to examine the potential of stress wave velocity (SWV) as a
rapid and non-destructive method to estimate the mechanical properties of Melia azedarach …

There is a growing interest in improving wood properties through the appropriate selection
of seed provenances within species. In this study, wood density and mechanical properties …

The objective of this research was to determine the influence of wood species (Fagus
sylvatica L. and Populus tremula L.), thickness (4, 6, 10, 18 mm), and degree of densification …

This article focuses on the analysis of the effect of certain factors (wood species, degree of
densification, material thickness and number of loading cycles) on the modulus of elasticity …

The traditional regression method was compared with an artificial neural network for
obtaining the static modulus of elasticity (MOEstatic) of Pinus radiata timber using the …

Despite their favorable physical and mechanical properties for structural use, tropical woods,
such as Iroko (Milicia excelsa), present knowledge gaps to be filled mainly about their …

This study aims to investigate the feasibility of CLT panels fabricated from salvaged dead
standing trees after the beetle outbreak by evaluating the flexural and shear properties …