Size effects (SEs) impede the mass production of high-performance miniaturised
components via micro-forming. Although many studies have examined SEs from multiple …

A combined low-temperature rolling and warm stamping process was proposed for a Fe-5.6
Mn-0.19 C-1.2 Al-0.05 Nb-0.22 Mo alloy to improve the tensile ductility and surface quality of …

Abstract In-situ Al–Mg 2 Si composites (0, 5, 10, 15, 20 wt% Mg 2 Si) were synthesized in an
Al–Mg–Si system through gravity casting route. Influences of the Mg 2 Si addition (in terms of …

Advanced high-strength steel (AHSS) is of great technological interest in automotive
lightweight applications. The dual-phase (DP) steel with a higher volume fraction of …

Deformation behaviour, micromechanical response, and failure initiation of Al–Mg 2 Si
composites have been investigated in terms of stress-strain flow behaviour and localization …

This work is aimed at solving the challenging problem of developing an approach to
determining the representative volume of an Al/SiC metal matrix composite material (MMC) …

Deformation experiments for two bainite steels at different strain rates are conducted to
analyze the effects of strain rate on deformation resistance during ausforming of two bainite …

基于试验得到的显微组织建立了7Mn 钢的代表性体积单元(RVE) 模型, 采用ABAQUS
软件对温轧和不同温度(600~ 630℃) 退火后7Mn 钢在单轴拉伸过程中的组织演变和应力 …

This work investigates the effect of 3D representative volume element (RVE) grain
morphology resolution on the prediction of fracture and damage evolution for tailor hot …

Based on the microstructure obtained by test, the representative volume element (RVE)
model of 7Mn steel was established. The microstructure evolution, stress and strain …