Flow structure and heat transfer characteristics of a pin-finned channel with upright/curved/inclined pin fins under stationary and rotating conditions

H Yan, L Luo, J Zhang, W Du, S Wang… - … Communications in Heat …, 2021 - Elsevier
This study aims to evaluate the heat transfer performance of different pin fins under
stationary and rotating conditions. Three kinds of pin fins (upright, curved and inclined) and …

Fill ratio effects on vapor chamber thermal resistance with different configuration structures

S Wiriyasart, P Naphon - International Journal of Heat and Mass Transfer, 2018 - Elsevier
The objective of this research is to present an investigation the thermal resistance of ten
vapor chambers with different configuration structures with different working fluid fill ratios …

Experimental investigation of the thermal performance in a single-component two-phase flow in multistream multi-fluid plate-fin heat exchangers

A Vaisi, K Javaherdeh, R Moosavi - International Journal of Thermal …, 2022 - Elsevier
This paper focuses on evaluating the effects of flow rate and temperature changes of hot and
cold fluid flows in multistream multi-fluid plate-fin heat exchangers with a single-component …

Effects of solid particles on fluid-particulate phase flow of non-Newtonian fluid through eccentric annuli having thin peristaltic walls

A Riaz, AU Awan, S Hussain, SU Khan… - Journal of Thermal …, 2022 - Springer
The current theoretical and mathematical treatments deal with the occurrence of solid
particles in the peristaltic stream of Jeffrey fluid traveling in an annular region of two …

Study on optimization of copper to aluminum for locomotive finned tube radiator

Y Guan, H Cui, J Fei - Energies, 2023 - mdpi.com
The influence of the improvement of the finned tube radiator unit structure on the fluid flow
and heat transfer effect of the locomotive was studied. A saw-toothed fin structure with …

Condensate retention as a function of condensate flow rate on horizontal enhanced pin-fin tubes

HM Ali, H Ali, M Abubaker, A Saieed, W Pao… - Thermal …, 2019 - doiserbia.nb.rs
The extent of condensate flooding as a function of condensate flow rate is measured on six
horizontal pin-fin tubes (varying in circumferential pin-spacing) via simulated …

Experimental study of condensation heat transfer on hydrophobic vertical tube

MR Rajkumar, A Praveen, RA Krishnan… - International Journal of …, 2018 - Elsevier
Condensation heat transfer on surfaces can be enhanced by altering the surface
topography. Surface modification technology can promote dropwise condensation which …

Assessment of boundary layer for flow of non‐Newtonian material induced by a moving belt with power law viscosity and thermal conductivity models

M Hassan, K Al‐Khaled, SU Khan, I Tlili… - … Methods for Partial …, 2023 - Wiley Online Library
The non‐Newtonian fluids have become quite prevalent in industry and engineering for
different applications. When these fluids flow over industrial equipment, a boundary layer …

Experimental investigation and non-dimensional regression analysis of condensation heat transfer of R-600a over finned tubes

SK Sajjan, AK Dewangan, R Kumar, A Gupta - International Journal of …, 2021 - Elsevier
In this study, condensation heat transfer of R-600a (Iso-butane) has been analyzed
experimentally over different finned tubes varying different parameters. These parameters …

Condensation heat transfer on geometrically enhanced horizontal tube: a review

HM Ali - Heat Exchangers-Advanced Features and Applications, 2017 - books.google.com
In this chapter, an attempt has been made to present the recent state of knowledge of free-
convection condensation heat transfer on geometrically enhanced tubes. This survey is …