Tape casting is a well-established technique to fabricate ceramic tapes. This technique has
been usually applied to produce dense substrates for electronic applications, but recently …

Purpose This study aims to experimentally investigate the effect of the powder material
characteristics on the qualities of the binder jetting additive manufacturing parts both before …

Low-cost ceramic microfiltration membranes were prepared using clay of IIT Guwahati. Two
membranes were prepared by paste casting followed by sintering at different temperatures …

Binder jetting additive manufacturing (BJ-AM) technology is a process by which a part is
fabricated layer by layer through depositing liquid binder in the designated regions of each …

Sol-gel process was modified by reverse micelles (RMs) for the preparation of γ-Al 2 O 3
ultrafiltration (UF) membranes and their applications in the efficient rejection of methyl blue …

With growing interest in hydrogen fuel cell applications, novel and robust water–gas shift
(WGS) industrial catalysts are required with high activity, preferably at low-temperatures …

The manufacturing and optimization of centrifugally casted ceramic membrane supports is
presented. For the optimization, the effect of three different powder sizes (0.25, 0.31 and …

Alumina membrane filters in the form of thin (0.3–0.8 mm) discs of 25–30mm diameter
suitable for microfiltration application have been fabricated by tape-casting technique …

Robust ceramic membranes presented attractive features of easy cleaning and excellent
stability compared to polymeric membranes. Nevertheless, their inherent relationships …

Two kinds of low-cost alumina powders with irregular morphology were pretreated by
spheroidization and the two spherical powders were used to prepare high-flux flat-sheet …