Coatings have been widely used in the corrosion protection of metallic materials in marine
environments. In this work, the corrosion and tribocorrosion behavior of three potential …

In this study, the WC-CoCr coating and Al 2 O 3-TiO 2 coating were deposited by high-
velocity oxygen-fuel (HVOF) spraying and atmospheric plasma spraying (APS), respectively …

Thermally-sprayed tungsten carbide (WC)-based cermet coatings have been widely used for
a large variety of wear resistance applications. More recently, these coatings are being used …

The slurry erosion-corrosion and microbial corrosion electrochemical behavior of high-
velocity oxygen-fuel (HVOF) sprayed WC-10Co-4Cr cermet coatings and the reference …

The influence of grain size and irradiation defects on the mechanical behavior and the
corrosion resistance of a 316 stainless steel have been investigated. Nanostructured …

Bi-layer coating systems comprising a Cr 3 C 2-NiCr coating with different underlying
coatings of Ni, NiCr, NiCoCrAlY, and CoNiCrAlY were deposited on 304L stainless steel …

There is an increasing demand to replace Co-based coatings with cheap and
environmentally friendly Fe-based coatings in corrosive environments. The main objective of …

Abstract In this study, Ni-Mo alloy films with different weight ratios were coated on mild steel
(G10700) by a novel and effective co-sputtering method, and their corrosion protection was …

WC-Co coatings have been extensively used in the applications requiring high abrasion and
erosion resistance. However, they are not known to have significant corrosion resistance. In …

Abstract WC-10Co-4Cr cermet coatings were deposited on the substrate of AISI 1045 steel
by using high-velocity oxygen-fuel (HVOF) thermal spraying process. The Taguchi method …