The effect of thermomechanical processing and cooling conditions on the microstructure and
mechanical properties during multi-step interrupted tensile tests was investigated in 0.24 C …

The quenching and partitioning (Q&P) process of lean medium Mn steels is a novel
approach for producing ultra-high strength and good formable steels. First, the steel is fully …

The study addresses the design and optimization of chemical composition and processing
routes of new quenching and partitioning medium-Mn alloy using theoretical and …

In this work, the influence of thermomechanical treatments, consisting of a combination of
ausforming followed by isothermal holding and cooling to room temperature, on the stability …

The thermal and mechanical stabilities of retained austenite in aluminum-containing
medium-Mn 0.16 C–4.7 Mn–1.6 Al–0.2 Si sheet steel were investigated. The strain-induced …

The objective of this study was to analyze the thermodynamic feasibility of forming
nanobainite in Al-alloyed medium-Mn steels through intercritical annealing (IA) and …

The investigation of the role of retained austenite (RA) in mediating hydrogen embrittlement
(HE) within quenching and partitioning (Q&P) steels presents considerable complexity …

Featured Application Proposed process simulator can be widely applied to parameter
design of industrial Tempcore process with reduced cost and time. Abstract Tempcore …

Experimental investigations of the plastic instability phenomenon in a hot-rolled medium
manganese steel were performed. The effects of tensile deformation in a temperature range …

The temperature-dependent microstructure evolution and corresponding mechanical
stability of retained austenite in medium-Mn transformation induced plasticity (TRIP) 0.17 C …