The angle of thermal spraying by the flame is considered one of the important influences on
the coating layer, where alumina (Al2O3)% was used as a base material, and it was …

Turbine blades commonly encounter external defects, such as cracks and high porosity,
while in operation. To mitigate these challenges, the method of thermal spraying by flame is …

In the current article, some physical properties of a system based on alumina (Al 2 O 3) and
supported by various weight ratios of TiAl were studied (5, 10, 15, 20, 25wt.%) by means of …

Then an initial thermal treatment was performed for the powders of the composite Cermet
materials before the coating process at (150 oC) temperature for (1hr), and after the coating …

Metallurgy Powder is employed appropriately in line with industrial development and
practicality in order to produce samples with unique properties and ease of application. This …

The effect of magnesium oxide content on the physical and mechanical properties of the
composites with crushed sulfur was studied. 2hr), where magnesium oxide powder was …

Pressing powders and engineering materials is an innovative method for producing samples
with a low cost and multiple industrial applications. In the current article, copper metal was …

Powder metallurgy has a wide range of industrial applications in the manufacture of tools,
brushes, ilters, and others. As a base of zirconia metal was used and supported by silicon at …

Aluminum suffers from low hardness and some ductility when thermal sintering which
requires reinforcement with carbide or ceramic materials as Iron FeC with volumetric …

Glasses with compositions (65%) Na2B4O7–(35-x)% V2O5–(x)% MgO, where x= 10, 15, 20,
or 25, is were produced using conventional melt quenching technique. The shifting rate of …