Phased microphone arrays have become a well-established tool for performing
aeroacoustic measurements in wind tunnels (both open-jet and closed-section), flying …

The newly refurbished vertical tunnel (V-tunnel) at Delft University of Technology has been
redesigned as a state-of-the-art facility for research in aeroacoustics (A-tunnel), as well as …

Open-jet, hard-wall, and hybrid test section configurations are typically used in wind tunnel
tests, aiming to represent the ideal free-flight condition. Each test section type requires …

Most acoustic imaging methods assume the presence of point sound sources and, hence,
may fail to correctly estimate the sound emissions of distributed sound sources, such as …

In this study, the propagation time and attenuation rate distributions of each sound source
grid point (200× 200) to a microphone of an arbitrary position across the shear layer, which …

This paper assesses the comparability of aeroacoustic slat noise measurement in an open-
jet, a hard-wall, and a hybrid test section configuration. The 30P30N common research …

Two types of aeroacoustic wind-tunnel test section configurations have been tested in the
NASA Langley Quiet Flow Facility. The first is a more traditional open-jet configuration …

View Video Presentation: https://doi. org/10.2514/6.2021-2113. vid This paper presents an
overview of the experimental data obtained in a 2020/2021 aeroacoustic test of the high-lift …

Acoustic imaging methods are used to detect and quantify aerodynamic noise sources in
aeroacoustic experiments. In wind tunnels with an open jet test section the sound wave …

Most acoustic imaging methods assume the presence of point sound sources and, hence,
fail to correctly estimate the sound emissions of distributed sound sources (such as trailing …