Rod shaped samples of AlSi10Mg additively manufactured using recycled powder through
direct metal laser sintering (DMLS) process showed higher quasi-static uniaxial tensile …

Microstructure of deformed DMLS-AlSi10Mg under quasi-static loading was studied using
TEM to elaborate the strengthening mechanisms. In addition to Orowan (due to presence of …

Microstructure of an additively manufactured AlSi10Mg through direct metal laser sintering
(DMLS) process is studied using multi-scale characterization techniques including scanning …

Проблема построения конститутивных моделей, позволяющих описывать поведение
материалов в широких диапазонах изменения параметров воздействия (температур …

This work aims at investigating the impact behavior of an additively manufactured AlSi10Mg
alloy subjected to different heat-treatment conditions. The commonly used heat-treatment …

In the current study, the microstructural consistency in a laser powder bed fusion (L-PBF)
AlSi10Mg material is investigated. A rectangular sample with a height of 40 mm is fabricated …

Due to the rapidly degradative mechanical performance of selective laser melted (SLM) Al–
12Si at elevated temperatures, an Al–12Si–Ti alloy was synthesized by SLM processing with …

Rod shaped samples of AlSi10Mg alloy were additively manufactured in vertical and
horizontal directions using direct metal laser sintering technique and subjected to dynamic …

An artificially aged AA6061 alloy was investigated at multiple heat treatment conditions with
monotonic tensile and cyclic shear testing to characterize the effect of precipitation on the …

The additive manufactured (AM) parts of aluminum alloys have been widely used in
defense, aerospace, automotive and other industries. There is a growing demand for joining …