During elevated-temperature thermomechanical processing, the occurrence of
recrystallization during straining is known as dynamic recrystallization (DRX), which usually …

Biodegradable implants from magnesium (Mg) alloys have emerged in the biomedical field
especially in the orthopedic and cardiovascular stent applications owing to their low density …

In this work, the highest yield strength and elongation in an Mg-Y-RE-Zr alloy produced by
an additive manufacturing (AM) process is reported. A combination of a large-diameter …

In the conventional melt preparation of magnesium rare-earth (Mg-RE) alloys, the repeated
heating/cooling process involved in grain refinement and flux refining usually prolongs the …

A Co-free as-cast AlCrFe 2 Ni 2 medium entropy alloy (MEA) with multi-phases was
remelted by fiber laser in this study. The effect of laser remelting on the microstructure …

The application scope and market demand for additive-manufactured high-entropy alloys
(AM HEAs) have broadened of late. However, a long-standing problem associated with AM …

A model of coupling macro finite volume method (FVM) and cellular automata (CA) is
proposed in this paper to explore the columnar-to-equiaxed transition (CET) during selective …

Abstract The recently-developed Al-Mn-Sc based alloys fabricated by laser-powder bed
fusion (L-PBF) have achieved a yield strength of 560 MPa and a ductility of 18%. However …

Grain structure control is essential in metal additive manufacturing. It is used to avoid
anisotropic mechanical properties, hot cracking and to increase the strength via the Hall …

The review encompasses state-of-the-art strategies for design and fabrication of smart
biomaterials for tissue engineering. The focus of the work is mainly put on metallic …