Lattice structures, which are also known as architected cellular structures, have been
applied in various industrial sectors, owing to their fascinated performances, such as low …

The present‐day ubiquity of smart devices used under extreme conditions demands robust
and more sustainable energy storage. Therefore, lightweight electrodes with both excellent …

In this research, the mechanical behavior of closed-cell aluminum (Al)-alloy foams was
investigated at different temperatures in the range of 25-450° C. The main mechanical …

The application of cellular structure for energy dissipation requires the investigation on the
deformation and failure process of the foam under dynamic loading. In this study, the split …

Shaped Mg alloy foams with closed-cell structure are highly interested for a great potential to
be utilized in the fields where weight reduction is urgently required. A powder metallurgical …

Aluminum matrix syntactic foams with the density of 1.68–2.05 g cm− 3 are prepared by the
stir casting method. Al2O3 hollow spheres with a volume fraction of 38–48% are chosen as …

The dynamic mechanical properties of magnetorheological plastomers (MRPs) were
investigated by using a Split Hopkinson Pressure Bar (SHPB) equipped with an …

The open-cell Mg-xSi (x= 1, 5, 9 wt%) foams reinforced by in-situ Mg 2 Si compounds were
prepared by pressure infiltration process. The optical microscopy (OM), scanning electron …

In this study, interconnected porous Mg-2Zn-xY alloys with different phase compositions
were prepared by various Y additions (x= 0.4, 3, and 6 wt.%) to adjust the compressive …

Microlattice structures produced by laser powder bed fusion (LPBF) have been tested in
compression extensively. Yet, their failure modes remain unexplained. This study bridges …