Significant advancements in the field of additive manufacturing (AM) have increased the
popularity of AM in mainstream industries. The dimensional accuracy and surface finish of …

To analyze the influence of the initial microstructure in the production of a dual phase (DP)
steel on the mechanical properties, a commercial DP steel was subjected to two heat …

A systematic experimental investigation was conducted to study the effect of the martensite
volume fraction on the scratch and abrasion resistance of ferrite–martensite dual phase (DP) …

The microstructures of an acicular ferrite (AF) and martensite/austenite (M/A) constituent
steel processed with cooling rate from 5 to 25° C/s after hot deformation were characterized …

Due to the inhomogeneous deformation of the microstructure, it becomes difficult as well as
necessary to determine the mechanical behavior of multi-phase high strength steels …

The third generation of advanced high-strength steels usually employs a multi-phase
microstructure to obtain excellent comprehensive mechanical properties. Though the effects …

Five ferrite/bainite (F/B) multi-phase experimental steels with different volume fraction of
bainite were processed by thermo-mechanical controlled processing (TMCP). The strain …

This paper presents the effect of martensite volume fraction (VM) on mechanical properties
of AISI 4340 steel with ferrite–bainite–martensite microstructures. The steel bars were …

Due to the lack of plastic strain accommodation and work-hardening capability, brittleness
still dominates dynamic deformation in most bulk metallic glass composites (BMGCs) …

The deformation characteristics of dual phase twinning-induced plasticity (TWIP) steel
containing different ferrite volume fractions have been investigated through tensile testing …