This paper presents a review of recent advances in modeling and simulation of conventional
metal machining processes, which continue to dominate a significant part of all machining …

Tool–chip contact length has a significant effect on the various characteristics of metal
cutting, including cutting pressures, chip formation, tool wear, tool life, and cutting …

This paper presents a review of recent advances in modeling and simulation of conventional
metal machining processes, which continue to dominate a significant part of all machining …

The paper deals with the issue of cutting zone and chip compression. The aim was to
analyse the microstructure transverse section of the cutting zone on a metallographic cut …

The thermomechanical interaction of the tool with the chip in the most loaded secondary
cutting zone depends on the contact length of the tool rake face with the chip. Experimental …

The development of cutting tools requires the knowledge of tribological phenomena at the
tool–workpiece contact area. This knowledge is in dearth particularly for difficult-to-cut alloys …

The contact length is one of the most important factors to evaluate the chip formation process
and the mechanical loads in metal cutting. Over the years, several methods to identify the …

Most studies have been carried out to investigate the surface integrity induced by metal
cutting process. However, the previous studies are limited to a longitudinal turning or …

Using cooling lubricants in metalworking requires a high consumption of energy and
resources. However, cooling lubricants serve to increase the productivity and quality of …

Friction significantly influences chip formation, thereby highlighting its modeling critical in
numerical cutting simulations. Notably, issues like the underestimation of feed force in …