This review is addressed to the phase inversion process, which is not only a common, low-
energy route to make stable emulsions for a variety of industrial products spanning from food …

Methods for flow visualization have been decisive for the historical development of fluid
mechanics. In recent years, technological advances in cameras, lasers, and other devices …

Water and crude oil emulsions can be produced during oilfield operations. Since most
oilfields are in the secondary or tertiary recovery stages, the amount of produced water is not …

With the evolution of downhole permanent monitoring techniques, transient temperature and
pressure data can play an important role in reservoir description due to their inherent real …

We experimentally investigate vertical upward oil–water two-phase flow in a 20mm inner
diameter pipe. We first using vertical multiple electrode array conductance sensor measure …

The simultaneous flow of oil and water in pipelines is a common occurrence in the
petroleum industry. Water fractions in the output stream increase materially during the …

The present work has attempted to identify the flow patterns during liquid–liquid two phase
flow through a vertical pipe. Dyed kerosene and water have been selected as the test fluids …

When crude oil and water are simultaneously transported in mild steel pipelines, corrosion
problems are generally associated with the water phase being in contact with the metal …

Abstract Electrical Submersible Pump (ESP) is one of the most commonly used artificial lift
methods in petroleum production, due to its capacity to operate in several conditions with …

Horizontal oil-water two-phase flow widely exists in petroleum and chemical engineering
industry, where the oil and water are usually transported together. As one of most …