Soot formation in laminar counterflow flames
Many practical soot-emitting combustion systems such as diesel and jet engines rely on
diffusion flames for efficient and reliable operation. Efforts to mitigate soot emissions from …
diffusion flames for efficient and reliable operation. Efforts to mitigate soot emissions from …
Laser-induced incandescence: recent trends and current questions
This paper provides an overview of a workshop focused on fundamental experimental and
theoretical aspects of soot measurements by laser-induced incandescence (LII). This …
theoretical aspects of soot measurements by laser-induced incandescence (LII). This …
Study of the formation of soot and its precursors in flames using optical diagnostics
P Desgroux, X Mercier, KA Thomson - Proceedings of the Combustion …, 2013 - Elsevier
Soot particle emission from combustion processes is a significant environmental and health
problem. Optical detection is clearly the only viable choice for in situ PAH and soot …
problem. Optical detection is clearly the only viable choice for in situ PAH and soot …
Investigation of soot formation in pressurized swirl flames by laser measurements of temperature, flame structures and soot concentrations
Soot formation and oxidation were investigated in swirl flames operated with ethylene/air at
elevated pressure in a gas turbine model combustor with optical access. Coherent anti …
elevated pressure in a gas turbine model combustor with optical access. Coherent anti …
A numerical study of high pressure, laminar, sooting, ethane–air coflow diffusion flames
NA Eaves, A Veshkini, C Riese, Q Zhang… - Combustion and …, 2012 - Elsevier
A numerical study is conducted of ethane–air coflow diffusion flames at pressures from 2 to
15atm. The model employed uses a detailed gas phase chemical kinetic mechanism that …
15atm. The model employed uses a detailed gas phase chemical kinetic mechanism that …
Laser-induced incandescence for soot diagnostics at high pressures
M Hofmann, WG Bessler, C Schulz, H Jander - Applied optics, 2003 - opg.optica.org
The influence of pressure on laser-induced incandescence (LII) is investigated
systematically in premixed, laminar, sooting ethylene/air flames at 1–15 bar with wavelength …
systematically in premixed, laminar, sooting ethylene/air flames at 1–15 bar with wavelength …
Sooting turbulent jet flame: characterization and quantitative soot measurements
Computational fluid dynamics (CFD) modelers require high-quality experimental data sets
for validation of their numerical tools. Preferred features for numerical simulations of a …
for validation of their numerical tools. Preferred features for numerical simulations of a …
Recent advances in the measurement of strongly radiating, turbulent reacting flows
Recent advances in diagnostic methods are providing new capacity for detailed
measurement of turbulent, reacting flows that are strongly radiating. Radiation becomes …
measurement of turbulent, reacting flows that are strongly radiating. Radiation becomes …
The influence of wavelength in extinction measurements and beam steering in laser-induced incandescence measurements in sooting flames
J Zerbs, KP Geigle, O Lammel, J Hader, R Stirn… - Applied Physics B, 2009 - Springer
The accuracy of laser-induced incandescence (LII) measurements is significantly influenced
by the calibration process and the laser profile degradation due to beam steering …
by the calibration process and the laser profile degradation due to beam steering …
Simultaneous planar measurements of temperature and soot volume fraction in a turbulent non-premixed jet flame
New measurements are reported of the soot–temperature interaction in a turbulent non-
premixed ethylene–hydrogen–nitrogen attached jet flame with an exit Reynolds number of …
premixed ethylene–hydrogen–nitrogen attached jet flame with an exit Reynolds number of …