Non-metallic inclusions were deformed and broken during hot and cold rolling processes.
The deformation of inclusions during the rolling process had an influence on the property of …

To solve the problem that the original GTN model cannot accurately simulate ductile fracture
of material under low stress triaxiality, many scholars have made shear improvement to it …

Product miniaturisation has increased the demand for cross-scaled components with various
sized features covering the macroscale (mm-scale) and mesoscale (μm-scale). During the …

High-performance marine steel is essential for the marine industry worldwide. L907A low-
alloy marine steel was developed by China independently and is now widely used in ship …

The effect of MnS inclusions on the plastic deformation and fracture behavior of a steel
matrix at high temperature was studied. The macroscopic mechanical properties of the …

Abstract The modified isotropic Mohr-Coulomb (iso-MMC) fracture model, which utilizes the
Mises yield function and isotropic hardening law, was calibrated through tensile tests on …

This study focused on the experimental investigations on parameter identification and failure
prediction of Ti-6Al-4 V by Gurson–Tvergaard–Needleman (GTN) model. Two approaches …

Explosion-welded steel/Al composite plate has advantages of excellent conductivity, heat
conductivity, light weight, and corrosion resistance. While the elongation of explosion …

The existence of MnS inclusions during thermal deformation affects the dynamic
recrystallization (DRX) behavior and twinning evolution of FCC matrix. In this study, we …

Herein, the void nucleation induced by typical inclusions in low‐density steel is observed
using a scanning electron microscope during the in situ tensile deformations, and the void …