Spheroidized ferrite-cementite steel (SFC) is susceptible to micro-defects owing to the
mismatched deformation between the ferrite and cementite during cold forming, which …

In this study, the ductile fracture of the alloy metal is analyzed. First, the key factors affecting
the initiation of ductile fracture are investigated. Then, a new uncoupled ductile fracture …

The interfacial stress-affected zone (ISAZ), characterized by a stress gradient maximizing at
the interface, is considered a key factor in determining the mechanical properties of …

Engineering strong and ductile structural materials has been an enduring pursuit over the
past few decades. Here we proposed a heterogeneous laminated/gradient integrated …

A novel original method of determination of stresses and critical resolved shear stresses
(CRSSs) using neutron diffraction was proposed. In this method, based on the crystallite …

This work aims at revealing the deformation mechanism of a newly developed Fe-18Ni-5Mo-
2Cr-1.2 Ti-0.6 V maraging steel with high strength and good ductility via in-situ synchrotron …

Abstract γ-based titanium aluminides exhibit remarkable mechanical properties at high
temperatures and are deployed in jet engines. The microstructure of these alloys, consisting …

The present study investigated the tensile deformation behavior of quenched and tempered
martensite steels at various austenitization and tempering temperatures using in situ neutron …

The transformation of a metastable phase plays an important role in guaranteeing the
excellent property of a material. However, this transformation introduces a new phase that …

This work evaluates the tribological behavior of three samples taken from a pearlitic steel rail
with different hardness values (550, 450 and 370 HV 0.1) due to the in-service work …