26 T 35 mm all-GdBa2Cu3O7–x multi-width no-insulation superconducting magnet
A 26 T 35 mm winding diameter all-GdBa 2 Cu 3 O ${} _ {7-x} $(GdBCO) magnet was
designed by the MIT Francis Bitter Magnet Laboratory, and constructed and tested by the …
designed by the MIT Francis Bitter Magnet Laboratory, and constructed and tested by the …
Over-current quench test and self-protecting behavior of a 7 T/78 mm multi-width no-insulation REBCO magnet at 4.2 K
This paper presents the over-current quench test and post-quench operation results of a 7 T
78 mm winding diameter multi-width (MW), no-insulation (NI) magnet in a bath of liquid …
78 mm winding diameter multi-width (MW), no-insulation (NI) magnet in a bath of liquid …
Non-twisted stacks of coated conductors for magnets: Analysis of inductance and AC losses
D Uglietti, R Kang, R Wesche, F Grilli - Cryogenics, 2020 - Elsevier
Abstract Almost all present High Temperature Superconducting (HTS) cable designs for
magnets are based on twisted or transposed concepts that were developed for Low …
magnets are based on twisted or transposed concepts that were developed for Low …
Electromagnetic-thermal-mechanical behaviors of a no-insulation double-pancake coil induced by a quench in the self field and the high field
D Liu, D Li, W Zhang, H Yong… - … Science and Technology, 2021 - iopscience.iop.org
High-temperature superconducting double-pancake (DP) coils wound by the no-insulation
(NI) approach have been proved to have a high thermal stability and a self-protecting ability …
(NI) approach have been proved to have a high thermal stability and a self-protecting ability …
Toward REBCO 20 T+ dipoles for accelerators
J van Nugteren, G Kirby, J Murtomäki… - IEEE Transactions …, 2018 - ieeexplore.ieee.org
ReBCO high temperature superconducting (HTS) coated conductor tapes are a promising
candidate for pushing the magnetic fields in accelerator magnets well beyond 20 T. They are …
candidate for pushing the magnetic fields in accelerator magnets well beyond 20 T. They are …
Quench analysis of pancake wound REBCO coils with low resistance between turns
WD Markiewicz, JJ Jaroszynski… - Superconductor …, 2015 - iopscience.iop.org
Quench in a pancake wound REBCO superconducting coil with low resistance (LR)
between turns is examined by numerical analysis. In these calculations it is generally …
between turns is examined by numerical analysis. In these calculations it is generally …
Understanding quench in no-insulation (NI) REBCO magnets through experiments and simulations
KR Bhattarai, K Kim, K Kim, K Radcliff… - Superconductor …, 2020 - iopscience.iop.org
Present research on no-insulation (NI) rare earth barium copper oxide (REBCO) magnets
have demonstrated their ability to produce high fields due to their compact nature. NI …
have demonstrated their ability to produce high fields due to their compact nature. NI …
Design, construction, and operation of an 18 T 70 mm no-insulation (RE) Ba2Cu3O7− x magnet for an axion haloscope experiment
We report the design, construction, and operation results of an 18 T 70 mm cold-bore high
temperature superconductor (HTS) no-insulation (NI) magnet, which is developed for an …
temperature superconductor (HTS) no-insulation (NI) magnet, which is developed for an …
Effect of resistive metal cladding of HTS tape on the characteristic of no-insulation coil
This paper presents experimental and theoretical studies of the no-insulation (NI) winding
method of second-generation high-temperature superconducting (HTS) wire. We compared …
method of second-generation high-temperature superconducting (HTS) wire. We compared …
Design, construction and 13 K conduction-cooled operation of a 3 T 100 mm stainless steel cladding all-REBCO magnet
A conduction-cooled 3 T 100 mm winding bore multi-width and no-insulation (NI) all-REBCO
magnet was designed, constructed and tested at 13 K. The magnet consists of a stack of …
magnet was designed, constructed and tested at 13 K. The magnet consists of a stack of …