Ceramic matrix composites (CMCs) and environmental barrier coatings (EBCs) are key
technologies that can enable improvements in the thermal and propulsive efficiency of gas …

The dependence on the impact angle of erosion damage caused by solid particle impact
was characterized on several kinds of material, as expressed by a trigonometric function of …

Abstract Erosion–corrosion (E–C) behaviour of a Fe-based amorphous metallic coating
(AMC) compared with 304 stainless steel (304 ss) was studied under a slurry impingement …

Silicon carbide (SiC) is extensively used for manufacturing of highly engineered parts due to
its high hardness, low coefficient of friction, wear resistance and high decomposition …

The erosive wear resistance of cermets with different composition, structure and properties
has been investigated. It has been shown that cermets erosive wear resistance cannot be …

Nowadays, bio-ceramic composite material is demanded in the biomedical industry due to
its remarkable biological and mechanical properties. But, the shaping of such material …

This work carried out liquid–solid two-phase jet experiments and simulations to study the
erosion behavior of 304 stainless steel at 30° impingement. The single-phase impinging jet …

Nano-multilayer coating is an effective method for improving the sand erosion resistance of
a material employed in any industrial field. However, very few studies have addressed this …

The impingement angle has a significant influence on the slurry erosion behavior. There is
limited knowledge of the effect of the impingement angle on the erosion of the micro …

Many materials are strain rate sensitive. It is therefore the purpose of this study to conduct a
comparative study of single-particle impact on mild steel with and without strain rate …