[HTML][HTML] Advances in burst-mode laser diagnostics for reacting and nonreacting flows
High-energy burst-mode lasers have enabled the development of kHz–MHz rate, multi-
dimensional diagnostics for characterizing highly dynamic and transient phenomena in …
dimensional diagnostics for characterizing highly dynamic and transient phenomena in …
Challenges for turbulent combustion
AR Masri - Proceedings of the Combustion Institute, 2021 - Elsevier
Turbulent combustion will remain central to the next generation of combustion devices that
are likely to employ blends of renewable and fossil fuels, transitioning eventually to …
are likely to employ blends of renewable and fossil fuels, transitioning eventually to …
A direct numerical simulation of cool-flame affected autoignition in diesel engine-relevant conditions
In diesel engines, combustion is initiated by a two-staged autoignition that includes both low-
and high-temperature chemistry. The location and timing of both stages of autoignition are …
and high-temperature chemistry. The location and timing of both stages of autoignition are …
Characterisation of two-stage ignition in diesel engine-relevant thermochemical conditions using direct numerical simulation
With the goal of providing a more detailed fundamental understanding of ignition processes
in diesel engines, this study reports analysis of a direct numerical simulation (DNS) …
in diesel engines, this study reports analysis of a direct numerical simulation (DNS) …
Two-stage autoignition and edge flames in a high pressure turbulent jet
A three-dimensional direct numerical simulation is conducted for a temporally evolving
planar jet of n-heptane at a pressure of 40 atmospheres and in a coflow of air at 1100 K. At …
planar jet of n-heptane at a pressure of 40 atmospheres and in a coflow of air at 1100 K. At …
The role of temperature, mixture fraction, and scalar dissipation rate on transient methane injection and auto-ignition in a jet in hot coflow burner
The transient injection and subsequent auto-ignition of a methane jet issuing into a laminar
coflow of hot exhaust gas from a lean premixed hydrogen air flame was studied using high …
coflow of hot exhaust gas from a lean premixed hydrogen air flame was studied using high …
High-speed formaldehyde planar laser-induced fluorescence and schlieren to assess influences of injection pressure and oxygen concentration on Spray A flames
The present study investigates the effect of injection pressure and ambient oxygen
concentration variations on the Engine Combustion Network Spray A flame. The two-stage …
concentration variations on the Engine Combustion Network Spray A flame. The two-stage …
Understanding and interpreting laser diagnostics in flames: A review of experimental measurement techniques
MJ Evans, PR Medwell - Frontiers in Mechanical Engineering, 2019 - frontiersin.org
There is a wealth of existing experimental data of flames collected using laser diagnostics.
The primary objective of this review is to provide context and guidance in interpreting these …
The primary objective of this review is to provide context and guidance in interpreting these …
Experimental assessment of the Tenti S6 model for combustion-relevant gases and filtered Rayleigh scattering applications
Abstract Accurate descriptions of Rayleigh–Brillouin scattering (RBS) spectra for gas-phase
species are important in light scattering measurement techniques including filtered Rayleigh …
species are important in light scattering measurement techniques including filtered Rayleigh …
Mind the gap: Turbulent combustion model validation and future needs
S Hochgreb - Proceedings of the Combustion Institute, 2019 - Elsevier
This overview collects a range of well characterized experiments used in the step-wise
validation of turbulent combustion models, from gas phase non-premixed jet flames to spray …
validation of turbulent combustion models, from gas phase non-premixed jet flames to spray …