In this paper, several multiaxial fatigue damage parameters taking into account
nonproportional additional hardening are reviewed. According to the way nonproportional …

In this work, the uniaxial and biaxial fatigue behaviour of maraging steel (18Ni300) obtained
by additive manufacturing was studied. The material was evaluated using several biaxial …

This work shows the results of a set of tests in 7075-T6 aluminium alloy specimens. The tests
were under load control at R=-1. From the tests, the corresponding SN curves were built …

High cycle fatigue tests have been conducted for stainless steel AISI 304L. The geometry is
a thin-walled tube with a passing-through hole. The tests are axial, torsional and in-phase …

A gradient nanostructured surface layer was fabricated in the commercial-purity titanium (Ti)
thin-wall tubular sample using the modified surface nanocrystallization (SNC) technique …

Multiaxial stress states frequently occur in technical components and, due to the multitude of
possible load situations and variations in behaviour of different materials, are to date not …

We investigate how the fatigue limit of notched specimens calculated with the Theory of
Critical Distance (TCD) changes when variations in the value of the critical distance itself are …

Biaxial fatigue behavior of gradient structural pure titanium fabricated by surface
nanocrystallization technique (SNC) was investigated under in-phase (IP) and out-of-phase …

Many methods have been proposed to predict fatigue failure in the presence of notches,
among which is the Navarro-Rios model. This model is based on short-crack fracture …

Fatigue life prediction, crack growth, and propagation mechanisms are important details to
consider for a structure to be used in service without fear of early failure. This is especially …