Quantification of damage due to surface tracking

V Rajini, KU Kumar - IEEE Transactions on Dielectrics and …, 2007 - ieeexplore.ieee.org
Fractals have been very successfully used to address the problem of modeling and to
provide a description of naturally occurring phenomena and shapes, wherein conventional …

Comparison of surface tracking in polymeric insulating materials

V Rajini, K Kanchana, V Gowrishree… - … Conference on Power …, 2004 - ieeexplore.ieee.org
A study was undertaken to investigate the surface tracking phenomena in different polymeric
insulating materials. The polymeric materials chosen were silicone rubber (SR), ethylene …

An investigation on characteristics of tracking failure in epoxy resin withharmonic and fractal dimension analysis

MM Ispirli, AE Yilmaz - Turkish Journal of Electrical …, 2018 - journals.tubitak.gov.tr
Epoxy resins have excellent mechanical and electrical properties; thus, they are commonly
preferred in the electrical {electronic sector as insulation materials. These insulation …

[PDF][PDF] Leakage current analysis of polymer insulating material with variable contaminant flow rate

MAM Piah, A Darus - National conf. Australasian Universities Power …, 2002 - academia.edu
Most polymer outdoor insulator may suffer from surface tracking phenomenon due to the
leakage current that flows on the insulator surface. The magnitude of leakage current …

Fractal analysis of nano-reinforced silicone rubber insulators evaluated on a tracking wheel

I Ramirez-Vazquez, J Ruiz-Pinales… - IEEE Electrical …, 2014 - ieeexplore.ieee.org
The increased use of polymer insulators on the overhead electrical power system has led to
many designs of insulators, with many profiles and materials, but the performance has not …

Analysing the 2-D surface tracking patterns by using cellular neural networks

M Ugur, ON Ucan, N Kuntman… - 1999 Annual Report …, 1999 - ieeexplore.ieee.org
Surface tracking is one of the major breakdown mechanisms observed on polymeric outdoor
insulators. Continuous discharges on the surface of the insulator cause hot spots on certain …

[PDF][PDF] A study on the investigation of surface tracking in polyester insulators

A Kuntman, M Uğur, A Merev - Eleco, 1999 - emo.org.tr
Electrical aging of insulators is associated with a wide variety of phenomena such as
breakdown, discharges, treeing, electron interactions with charges, phonons, matters, etc …

Mathematical analysis of leakage current level in correlation with environmental stresses for solid insulating material under tracking test

M Afendi, M Piah, A Darus - PECon 2004. Proceedings …, 2004 - ieeexplore.ieee.org
Environmental pollution can cause the insulator material to become progressively coated
with dirt and chemicals in the long run. In the presence of wet atmospheric conditions, the …

[PDF][PDF] Investigation on Surface Degradation of Modified Polymeric Electrical InsulationTested via Inclined Plane Tracking Method

A Suksri, K Tanmitra - Proceedings of Electrical/Electronics, Computer …, 2005 - Citeseer
This research work is carried out to investigate the surface degradation of modified
polymeric electrical insulator when tested under inclined plane tracking method. The test …

Influence of filler properties on the tracking characteristics of silicone rubbers

SB Lee, WY Ji, YH Park, JH Lee - Proceedings of the 6th …, 2000 - ieeexplore.ieee.org
Polymer insulating materials are widely used in power distribution and transmission systems
for their good dielectric properties such as light weight, low cost, and good contamination …