The most well-known and widely used non-traditional manufacturing method is electrical
discharge machining (EDM). It is well-known for its ability to cut rigid materials and high …

Over the years, sinking electrical discharge machining has become one of the most
important production technologies to manufacture very accurate three-dimensional complex …

The present research work is concentrated around the machining of titanium grade 5 alloy
using electric discharge drilling. The process response parameters viz. hole taper and hole …

Abstract Electric Discharge Drilling (EDD), a spark erosion drilling process, is designed to
produce small to large size holes in high-strength and heat-resistant materials with the …

Electrical Discharge Machining (EDM) is one of the most efficient processes to produce high-
ratio micro holes in difficult-to-cut materials in the Inconel 718 superalloy. It is important to …

Electric discharge machining (EDM) is a nontraditional machining process based on the
thermal erosion of the electrically conductive workpiece and tool electrodes. The product …

There is a need for heavy-duty machining equipment and tooling to minimize chatter due to
work-hardening of the INCONEL materials ahead of cutting. Optimum EDM parameters are …

Electrical discharge machining (EDM) is commonly used to machine hard-to-cut materials
without physical contact between the workpiece and the tool. It works on a dominant thermal …

The requirement of deep hole drilling has tremendously increased in recent years and it
extensively found applications in automobile fuel injectors, biomedical implants, aerospace …

Inconel 718 alloy is the most used nickel-based superalloy owing to its characteristics of
excellent mechanical and chemical properties at high temperatures and relatively low cost in …