If variety is the spice of life, then abnormal grain growth (AGG) may be the materials
processing equivalent of sriracha sauce. Abnormally growing grains can be prismatic …

Abnormal grain growth (AGG), where a small number of grains grow to sizes much larger
than the neighboring matrix grains, is a frequent occurrence in liquid phase sintering of …

Abnormal grain growth (AGG) in a Zn-0.8 Ag (wt%) alloy, produced through the application
of high-pressure torsion (HPT), was systematically investigated using scanning electron …

Synthesis of large‐scale single‐crystalline graphene monolayers without multilayers
involves the fabrication of proper single‐crystalline substrates and the ubiquitous formation …

In this study, the recrystallization process of selective laser melted (SLM) commercially pure
titanium (CP-Ti) was followed by a quasi-in-situ electron backscatter diffraction (EBSD) …

Ceramics with nominal chemical composition CaCu 3 Ti 4 O 12 (CCTO), CaCu 3 Ti 3.96 Al
0.04 O 11.96 F 0.04 (CCTOAF), and Ca 0.98 Mg 0.08 Cu 2.94 Ti 3.96 Al 0.04 O 11.96 F 0.04 …

The orientation and shape of ceramics grains was always neglected, resulting in a lot of
information during sintering has not been excavated. In this study, a modified phase-field …

The need for enhanced radiation-tolerant materials for advanced nuclear energy designs
has resulted in a growing number of investigations that have explored the effect of grain …

Austenitic stainless steels 304 L (SS304) and 316 L (SS316) are additive manufactured
under the same processing conditions to reveal two distinct microstructures. Particularly, the …

Heterogeneous grain structures may develop due to abnormal grain growth during
processing of polycrystalline materials ranging from metals and alloys to ceramics. The …