Al-Si controlled expansion alloys for electronic packaging applications
The demand for thermal management in electronic packaging (EP) and its allied industries,
especially in high-power electronics, has grown in the last three decades due to the …
especially in high-power electronics, has grown in the last three decades due to the …
Process optimization, microstructures and mechanical/thermal properties of Cu/Invar bi-metal matrix composites fabricated by spark plasma sintering
Q Nie, G Chen, W Bing, Y Lei, W Tang - Transactions of Nonferrous Metals …, 2021 - Elsevier
An orthogonal experiment scheme was designed to investigate the effects of the Cu content,
compaction pressure, and sintering temperature on the microstructures and mechanical and …
compaction pressure, and sintering temperature on the microstructures and mechanical and …
Effect of Invar particle size on microstructures and properties of the Cu/Invar bi-metal matrix composites fabricated by SPS
Q Nie, G Chen, B Wang, L Yang, J Zhang… - Journal of Alloys and …, 2022 - Elsevier
Abstract The Cu/Invar bi-metal matrix composites have a great potential to be used as novel
electronic packaging materials. In order to clarify effects of the Invar particle size on …
electronic packaging materials. In order to clarify effects of the Invar particle size on …
[HTML][HTML] Cold sprayed Cu/Invar alloy composite
DL Ouyang, ZR Wang, T Yang, LW Zhang, D Wu… - Journal of Materials …, 2025 - Elsevier
Cold spray, an additive manufacturing technique based on plastic deformation of particles,
was employed to prepare Cu/Invar alloy composites to avoid issues from other preparation …
was employed to prepare Cu/Invar alloy composites to avoid issues from other preparation …
Fabrication of the Ag-coated Invar/Cu bimetal matrix composites through spark plasma sintering: An investigation on microstructure and properties
Q Nie, B Wang, J Zhang, W Tang - Materials Letters, 2022 - Elsevier
Cu matrix composites reinforced with 50 wt% Ag-coated Invar (Ag (Invar)) powder were
prepared by spark plasma sintering at temperatures of 700° C and 750° C. Effects of the Ag …
prepared by spark plasma sintering at temperatures of 700° C and 750° C. Effects of the Ag …
Effect of duty cycle on microstructure and mechanical properties of pulsed GTAW lap joint of Invar
H Wang, S Hu, J Shen, D Li, J Lu - Journal of Materials Processing …, 2017 - Elsevier
7 mm and 1.0 mm Invar sheets in vertical position were lap-jointed by pulsed gas tungsten
arc welding (pulsed GTAW). The macro morphology, microstructure and mechanical …
arc welding (pulsed GTAW). The macro morphology, microstructure and mechanical …
[HTML][HTML] Study on Pulsed Gas Tungsten Arc Lap Welding Techniques for 304L Austenitic Stainless Steel
Y Jiang, J Wu, C Zhou, Q Han, C Hua - Crystals, 2024 - mdpi.com
The lap welding process for 304L stainless steel welded using the pulsed gas tungsten arc
welding (P-GTAW) procedure was studied, and the effects of the pulse welding parameters …
welding (P-GTAW) procedure was studied, and the effects of the pulse welding parameters …
Research On Pulsed-Gas Tungsten Arc Lap Welding Techniques for 304l Austenitic Stainless Steel
Y Jiang, J Wu, C Zhou, Q Han, C Hua - Available at SSRN 4855301 - papers.ssrn.com
The lap welding process for 304L stainless steel welded using the pulsed-gas tungsten arc
welding (P-GTAW) procedure was studied, and the effects of pulse welding parameters (the …
welding (P-GTAW) procedure was studied, and the effects of pulse welding parameters (the …
Radiation Tolerance of the Fe65ni35 Invar Alloy Against Proton Irradiation
M Usman, A Akbar, AB Ziya, RY Khosa… - Available at SSRN … - papers.ssrn.com
The present study investigates the structural, electrical, and thermal properties of Fe65Ni35
invar alloy after irradiation with 2 MeV protons (H+) at fluences ranging from 1× 1014 to 5× …
invar alloy after irradiation with 2 MeV protons (H+) at fluences ranging from 1× 1014 to 5× …