A summary of corrosion properties of Al-rich solid solution and secondary phase particles in Al alloys

J Li, J Dang - Metals, 2017 - mdpi.com
The heterogeneous structure of Al alloys renders them susceptible to localized corrosion
due to the different electrochemical properties existing in the Al-rich solid solution matrix and …

[HTML][HTML] Dislocation-assisted localised pitting corrosion behaviour of AlSiMgCuMn alloy

SH Kayani, HY Ha, YH Cho, HW Son, JM Lee - Corrosion Science, 2023 - Elsevier
The effects of the electrochemical nature of intermetallic particles (IMPs) and dislocation
density on the localised pitting corrosion behaviour of Alsingle bondSisingle bondMgsingle …

General aspects related to the corrosion of 6xxx series aluminium alloys: Exploring the influence of Mg/Si ratio and Cu

WJ Liang, PA Rometsch, LF Cao, N Birbilis - Corrosion science, 2013 - Elsevier
Specially prepared 6xxx series aluminium alloys (Al–Mg–Si) with different Mg/Si ratios and
Cu contents were investigated in the naturally aged, under-aged, peak-aged and over-aged …

[HTML][HTML] Electron microscopy analysis of grain boundaries and intergranular corrosion in aged Al-Mg-Si alloy doped with 0.05 wt% Cu

EH Bartawi, OV Mishin, G Shaban, JH Nordlien… - Corrosion …, 2022 - Elsevier
The microstructure and intergranular corrosion have been studied in an extruded and aged
Al-Mg-Si alloy doped with 0.05 wt% Cu after immersing the material in an acidified salt …

Corrosion and pitting of 6060 series aluminium after 2 years exposure in seawater splash, tidal and immersion zones

M Liang, R Melchers, I Chaves - Corrosion Science, 2018 - Elsevier
New longer-term observations of corrosion and pitting of 6060-grade aluminium alloy
showed that the most intensive pitting and corrosion occurred in the marine immersion zone …

[HTML][HTML] Corrosion behaviour of AA6082 Al-Mg-Si alloy extrusion: The influence of quench cooling rate

X Zhang, X Zhou, JO Nilsson - Corrosion Science, 2019 - Elsevier
The influence of quench cooling rate on corrosion behaviour of AA6082-T6 Al-Mg-Si alloy
extrusion is investigated. It is revealed that different quench cooling rates result in significant …

Property criteria for automotive Al-Mg-Si sheet alloys

R Prillhofer, G Rank, J Berneder, H Antrekowitsch… - Materials, 2014 - mdpi.com
In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and
investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013 …

The intergranular corrosion susceptibility of 2024 Al alloy during re–ageing after solution treating and cold–rolling

Z Wang, P Chen, H Li, B Fang, R Song, Z Zheng - Corrosion science, 2017 - Elsevier
The intergranular corrosion (IGC) susceptibility of 2024 Al alloy during re–ageing after
solution treating and cold–rolling was investigated by accelerated corrosion testing, open …

[HTML][HTML] Mechanical properties and corrosion behavior of artificially aged Al-Mg-Si alloy

AP Sekhar, AB Mandal, D Das - Journal of Materials Research and …, 2020 - Elsevier
This article reports the influence of the state of artificial ageing on the hardness, tensile
properties and corrosion behavior of an Al-Mg-Si alloy. Pitting corrosion in 0.1 M NaOH …

The intergranular corrosion susceptibility of a heavily overaged Al-Mg-Si-Cu alloy

H Li, P Zhao, Z Wang, Q Mao, B Fang, R Song… - Corrosion …, 2016 - Elsevier
Usually, underaged or peakaged Al-Mg-Si-Cu alloys are susceptible to intergranular
corrosion (IGC), whereas overaging can eliminate the IGC susceptibility. However, it is found …