The increased use of non-linear loads results in more harmonics content in the source current. Shunt active power filters are used for correction of distorted source current by …
Distributed generation in combination with switching adaptive loads providing optimized energy management in the prosumers' installations results in bidirectional active energy …
J Klusacek, R Langella, J Meyer… - IEEE Transactions on …, 2024 - ieeexplore.ieee.org
Bidirectional active energy flows are expected to increase in electrical distribution systems (DSs) worldwide as a result of future incentives to exchange energy within local energy …
J Drapela, J Moravek, L Radil… - 2020 19th International …, 2020 - ieeexplore.ieee.org
Rapid and frequent changes in energy flow direction, those may occur in active distribution systems due to presence of (un) intentional generation with simultaneous consumption …
M Ashraf, A Rehman - 2018 5th International Conference on …, 2018 - ieeexplore.ieee.org
In this paper a comparison is made between three different control strategies for reference current generation in three-phase three-wire shunt active power filter. Two approaches are …
The paper defines the basic problems of the operation of hybrid photovoltaic systems up to 10 kWp with accumulation–the conditions for elimination of overflows into the distribution …
A Niemi, M Lehtonen… - 2017 IEEE PES …, 2017 - ieeexplore.ieee.org
Power quality issues are one of the challenges associated with increasing utilization of photovoltaic power. In this study, the effect of solar irradiance variations on flicker is …
M Ashraf, A Rehman - IOP Conference series: Earth and …, 2018 - iopscience.iop.org
Abstract Shunt Active Power Filter (SAPF) can be used for compensation of current harmonics generated by non-linear loads. The process involves an injection of equal but …
The paper is focused on advanced approaches to resistive adaptive demand response control into heat accumulation, implemented in installations with a small-scale power …