Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review
E Huttunen-Saarivirta - Journal of Alloys and Compounds, 2004 - Elsevier
Quasicrystalline materials constitute a new materials group with certain crystalline structural
characteristics, such as the generation of Bragg peaks in the X-ray data and points in the …
characteristics, such as the generation of Bragg peaks in the X-ray data and points in the …
Analysis of intermetallic layer in dissimilar TIG welding–brazing butt joint of aluminium alloy to stainless steel
JL Song, SB Lin, CL Yang, CL Fan… - … and Technology of …, 2010 - journals.sagepub.com
Intermetallic layer of dissimilar tungsten inert gas welding–brazing butt joint of aluminium
alloy/stainless steel has been studied. A visible unequal thickness intermetallic layer has …
alloy/stainless steel has been studied. A visible unequal thickness intermetallic layer has …
Experimental investigation and thermodynamic modeling of the ternary Al–Cu–Fe system
The constitution of the ternary system Al–Cu–Fe in the region above 40 at.% Al at 600° C is
investigated by means of x-ray diffraction, metallography, scanning electron microanalysis …
investigated by means of x-ray diffraction, metallography, scanning electron microanalysis …
Al-Cu-Fe (aluminum-copper-iron)
V Raghavan - Journal of phase equilibria and diffusion, 2005 - search.proquest.com
The previous review of this system by [1992Rag] presented two partial liquidus surfaces for
Al-rich and Cu-rich alloys, and an isothermal section at 600 C, mainly from the work of …
Al-rich and Cu-rich alloys, and an isothermal section at 600 C, mainly from the work of …
Preparation and characterisation of melt-spun Al–Cu–Fe quasicrystals
E Huttunen-Saarivirta, J Vuorinen - Intermetallics, 2005 - Elsevier
Three Al–Cu–Fe alloys with compositions of Al60–65Cu20–27.5 Fe12. 5–15 were prepared
by conventional casting and further processed by melt-spinning. The structures formed were …
by conventional casting and further processed by melt-spinning. The structures formed were …
Characterization of the icosahedral quasicrystalline phase in rapidly solidified Al–Cu–Fe alloys
The present research aimed to characterize the microstructure of icosahedral
quasicrystalline phase (i-phase) in different chemical compositions of Al–Cu–Fe alloys. The …
quasicrystalline phase (i-phase) in different chemical compositions of Al–Cu–Fe alloys. The …
Morphological characteristics of the rapidly and conventionally solidified alloys of the AlCuFe system
Different alloy compositions of AlCuFe in the composition range of Al (75–65), Cu (25–15)
and Fe (15–7) at.% have been studied. Experimental results obtained in the Al70Cu20Fe10 …
and Fe (15–7) at.% have been studied. Experimental results obtained in the Al70Cu20Fe10 …
A study on spherical particles in Al65Cu20Fe15 alloy prepared by arc melting
C Li, C Carey, D Li, M Caputo, R Bouch… - Materials …, 2018 - Elsevier
Abstract Al-Cu-Fe alloys are important due to reports that stable icosahedral quasicrystalline
phase with composition in the vicinity of Al 65 Cu 20 Fe 15 can be prepared. However, it has …
phase with composition in the vicinity of Al 65 Cu 20 Fe 15 can be prepared. However, it has …
[PDF][PDF] Quasicrystal phase structural properties in the AlCuCo ternary system
G Rosas, C Angeles-Chavez… - J. New Mater. Electrochem …, 2005 - researchgate.net
Different AlCuCo alloys, with composition values close to those values where the
quasicrystalline decagonal phase was obtained in the past, have been prepared. The alloys …
quasicrystalline decagonal phase was obtained in the past, have been prepared. The alloys …
铸造法制备Al63Cu25Fe12准晶
韩宝军， 彭光怀， 张小联 - 有色金属科学与工程, 2009 - ysjskxygc.xml-journal.net
通过常规铸造法制备了Al 63 Cu 25 Fe 12 准晶合金, 并对其热处理工艺进行了初步探索,
采用显微镜和扫描电镜观察了金相组织, 采用XRD 衍射分析了其中的准晶相及类似晶体相 …
采用显微镜和扫描电镜观察了金相组织, 采用XRD 衍射分析了其中的准晶相及类似晶体相 …