The most important components for application in high-power all-fiber lasers and amplifiers
are, most of all, power combiners, but also mode field adaptors. This paper summarizes …

With home-made fiber perform and special fiber drawing & coating technique, a new-type of
(3+ 1) GTWave fiber theoretically designed for bi-directional pump method, was successfully …

We report a new method to fabricate a 4× 1 signal combiner that comprises an output fiber
port and a tapered fused bundle (TFB) with four input fiber ports. The TFB is etched in a …

We report on a home-made 2 kW (2+ 1) GT-wave fiber, and demonstrated its use in the
creation of a bidirectional pump amplifier. The constructed all-fiber master oscillator power …

We show the feasibility of producing a low-mode all-fiber combiner fabricated from a large
core and extremely small NA fibers. Although these fibers support multiple modes, the …

Pump modules for fiber lasers and fiber-coupled direct diode laser systems require laser
diodes with a high beam quality. While in fast axis direction diode lasers exhibit a nearly …

Abstract Design considerations and fabrication details of a high-efficiency 5× 1 pump
combiner with a brightness ratio of 1.05 are presented. Using five 135/155 μm NA= 0.22 …

The superiority of parabolic-index fibers over step-index fibers in delivering high-beam-
quality light out of incoherently combined lasers is demonstrated numerically and …

In this paper our results of investigation on a pump power combiner in a configuration of 7×
1 are presented. The performed combiner, with pump power of 80–85% transmission level …

摘要高功率光纤激光器是目前激光器研究发展的一个热点. 抽运耦合功率将直接决定光纤激光器
的输出功率. 分析了光纤激光抽运耦合技术的研究现状, 从端面抽运耦合和侧面抽运耦合两大 …