This paper presents a historical perspective on the development of the model that was
initially proposed by Prof. Marciniak in 1965 for calculating the Forming Limit Curves (FLC's) …

Deformation instability is a macroscopic and microscopic phenomenon of non-uniformity
and unstable deformation of materials under stress loading conditions, and it is affected by …

A tailor rolled blank (TRB) is a plate of continuously varying thickness with the advantages of
lightweight, high strength, and good surface quality. However, it is required that the roll gap …

The aim of this research was to introduce a simulation-based approach for determination of
the Forming limit curve (FLC) in two-layer metallic sheets. In this study, the FLC of aluminum …

Assessment of the role of weld zone and difference in the material properties across the dual
phase steel tailor welded blanks (TWBs) during sheet forming is imperative prior to …

The aim of this research was to introduce a computational approach for prediction of the
forming limit diagram of Al-Cu two-layer metallic sheets. The computational approach was …

The effect of laser cutting parameters on the mechanical behavior of laser butt welded joints
whose edges were obtained by laser cutting was investigated. The paper aims to …

The formability of AA7075-T6 friction stir (FS) welded tailor-made blanks was investigated
through the hemispherical-punch stretching method, experimentally and numerically. The …

To improve the formability in stamping, a blank was locally work-hardened by indentation
with a punch. Local strength expressed as a product of flow stress and thickness is …

The application of dual phase steel in the automotive sector is increasing due to its high
strength-to-weight ratio and good shock absorption capacity. The formability of dual phase …