Metallic glass matrix composites
J Qiao, H Jia, PK Liaw - Materials Science and Engineering: R: Reports, 2016 - Elsevier
The mechanical properties of ex-situ and in-situ metallic glass matrix composites (MGMCs)
have proven to be both scientifically unique and of potentially important for practical …
have proven to be both scientifically unique and of potentially important for practical …
Modeling of contact temperatures and their influence on the tribological performance of PEEK and PTFE in a dual-pin-on-disk tribometer
Z Lin, T Qu, K Zhang, Q Zhang, S Wang, G Wang… - Friction, 2023 - Springer
The direct blending of polyether ether ketone (PEEK) with a solid lubricant such as
polytetrafluoroethylene (PTFE) improves its tribological performance, but compromises its …
polytetrafluoroethylene (PTFE) improves its tribological performance, but compromises its …
Tribological Properties of AlCrCuFeNi2 High-Entropy Alloy in Different Conditions
In order to understand the environmental effect on the mechanical behavior of high-entropy
alloys, the tribological properties of AlCrCuFeNi 2 are studied systematically in dry …
alloys, the tribological properties of AlCrCuFeNi 2 are studied systematically in dry …
Surface roughness effect on the friction and wear of bulk metallic glasses
This paper investigates the effect of surface roughness on the friction and wear of bulk
metallic glasses (BMGs). The pin-on-disk tests were carried out with the BMG pins of Ti 40 Zr …
metallic glasses (BMGs). The pin-on-disk tests were carried out with the BMG pins of Ti 40 Zr …
Tribological behavior of Ti–6Al–4V alloy: Subsurface structure, damage mechanism and mechanical properties
This paper describes the wear behavior, subsurface damage mechanism with structural
change and indentation creep of bioinert Ti–6Al–4V alloy at different applied loads. Wear …
change and indentation creep of bioinert Ti–6Al–4V alloy at different applied loads. Wear …
Effect of rotation speed on the abrasive–erosive–corrosive wear of steel pipes against steel casings used in drilling for petroleum
L Mao, M Cai, G Wang - Wear, 2018 - Elsevier
This work aimed to investigate the effect of the rotational speed of drilling pipe on casing
wear using a laboratory-scale, pin-on-disc machine. The material used for the cylindrical pin …
wear using a laboratory-scale, pin-on-disc machine. The material used for the cylindrical pin …
[HTML][HTML] Implementation of roughness and elastic-plastic behavior in a wheel-rail contact modeling for locomotive traction studies
All engineering surfaces are rough on the microscale, and the actual contact area is only a
fraction of the geometrical area. Thus, it is essential to include roughness parameters in the …
fraction of the geometrical area. Thus, it is essential to include roughness parameters in the …
Size effect on friction and wear mechanisms of bulk metallic glass
ML Rahaman, L Zhang - Wear, 2017 - Elsevier
This paper investigates the effect of sample size on the friction and wear of a bulk metallic
glass (BMG), Ti 40 Zr 25 Ni 3 Cu 12 Be 20. The sliding tests were conducted on a pin-on …
glass (BMG), Ti 40 Zr 25 Ni 3 Cu 12 Be 20. The sliding tests were conducted on a pin-on …
Surface structure and properties of metallic glasses
DV Louzguine-Luzgin, SV Ketov, AS Trifonov… - Journal of Alloys and …, 2018 - Elsevier
Surface state and its quality determine some important properties of metallic glasses.
Control over of the nanoscale tribological behavior of metallic glasses is fundamental for …
Control over of the nanoscale tribological behavior of metallic glasses is fundamental for …
On the diversity of accommodation mechanisms in the tribology of Bulk Metallic Glasses
PH Cornuault, G Colas, A Lenain, R Daudin… - Tribology …, 2020 - Elsevier
Abstract Bulk Metallic Glasses (BMG) have exceptional mechanical properties compared to
their traditional crystalline counterparts. However, BMGs often exhibit scattered tribological …
their traditional crystalline counterparts. However, BMGs often exhibit scattered tribological …