The fatigue crack propagation (FCP) characteristics of two Al-Cu-Li-Mg-Ag alloys were
investigated with regard to the grain boundaries (GBs) and crystal orientation. The Sc-added …

We demonstrate via comprehensive microstructural investigation the effects of Sc and Be
microalloying on the mechanical properties of Al-Zn-Mg-Cu-based alloys, where Sc …

The fatigue crack propagation (FCP) behavior of a new Al–Cu–Li alloy under different aging
treatments including T3, T8, and non-isothermal aging (NIA) was investigated. It was …

Differed from the traditional aluminum alloy enhanced by single strengthening phase, a new
design of AA6111–3ZrB 2-0.3 Er-0.1 Zr composites reinforced by in situ ZrB 2 nanoparticles …

In this study, the effects of chemical composition and process routes on the microstructure
and mechanical properties of high-Zn-content Al-Zn-Mg-Sc alloys were investigated. Aging …

This study investigated the effect of Sb additions (0, 0.4, 0.8, 1.2, 1.6, and 2.0 wt.%) on the
microstructure, mechanical properties, and thermal conductivity of hypereutectic Al-20Si-0.3 …

In this study, Al-20 wt% Mg 2 Si composites were prepared using an in situ endogenous
process method. Various amounts of Sc were added to the composites, and a heat treatment …

We investigate the effect of the natural age-hardening response of the Al-20Zn-3Cu alloy
with natural aging times up to 12 months. The ultimate tensile strength of the Al-20Zn-3Cu …

The microstructure and mechanical properties of the ZrB2/7085Al composites containing Sc
were studied. The ZrB2/7085Al composites were prepared by in situ reaction via Al-Zr-B …

We investigated the effect of solution temperature (T sol.= 440–530° C) on the mechanical
properties of the Al–3.4 Cu–0.34 Mg–0.3 Mn–0.17 Ag alloy, finding that the investigated Al …