There is a need to design a reliable lightweight solid rocket motor case, pressure vessel for
a launch vehicle or a missile system. The rocket motor case used in the advanced solid …

Electro Discharge Machining (EDM) can be an element of a sustainable manufacturing
system. In the present study, the sustainability implications of EDM of special-purpose steels …

A deformation-mechanism-based true-stress creep model is proposed for studying the creep
behavior of modified 9Cr-1Mo steel in this research. Constant-load creep test is conducted …

Thermal barrier coating (TBCs) are ceramic coatings that are deposited on metallic
substrates to provide high thermal resistance. Residual stress is among the critical factors …

Stainless Steel 304 is being investigated for accident tolerant claddings. In this investigation,
we use multi-modal characterization to evaluate oxidation under laboratory air versus 100 …

Due to the multilayered pattern of coating deposition, residual stresses are commonly
developed in thermal spray coatings (TSCs). The large deformation, complex interaction and …

The tensile strength of copper alloy–stainless steel bi-layer panels joined by hot isostatic
pressing or explosive bonding was tested over a temperature range 25–350° C. The …

The objective of this study is to understand and quantify the thermo-mechanical behavior of
hollow sphere (HS) steel and powder metallurgy (PM) aluminum foams over a broad range …

Limited information is available on the oxidation mechanism of accident tolerant claddings
(ATC) Kanthal APMT and T91 at the onset of beyond design-basis accident (BDBA) …

Thermal spray coatings are usually deposited by first heating the feedstock (powder)
material into a series of molten or semi-molten droplets before being applied to the substrate …