Fundamentals and advances in magnesium alloy corrosion
There remains growing interest in magnesium (Mg) and its alloys, as they are the lightest
structural metallic materials. Mg alloys have the potential to enable design of lighter …
structural metallic materials. Mg alloys have the potential to enable design of lighter …
Electrochemical impedance spectroscopy for the measurement of the corrosion rate of magnesium alloys: Brief review and challenges
S Feliu Jr - Metals, 2020 - mdpi.com
From a technological point of view, measurement of the corrosion rate of magnesium (Mg)
and its alloys is critical for lifetime predictions of Mg-based structures and for comparative …
and its alloys is critical for lifetime predictions of Mg-based structures and for comparative …
Superior corrosion protection and adhesion strength of epoxy coating applied on AZ31 magnesium alloy pre-treated by PEO/Silane with inorganic and organic …
PEO/Silane/Epoxy coating system with inorganic inhibitor (Ce (NO 3) 3) in the plasma
electrolytic oxidation (PEO) layer as well as organic inhibitors in the silane layer was …
electrolytic oxidation (PEO) layer as well as organic inhibitors in the silane layer was …
Additively manufactured biodegradable porous magnesium
An ideal bone substituting material should be bone-mimicking in terms of mechanical
properties, present a precisely controlled and fully interconnected porous structure, and …
properties, present a precisely controlled and fully interconnected porous structure, and …
Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study
Experiments were conducted to enable the simultaneous measurement of electrochemical
impedance and collection of hydrogen gas during the corrosion of pure magnesium in NaCl …
impedance and collection of hydrogen gas during the corrosion of pure magnesium in NaCl …
Electrochemical impedance spectroscopy
ME Orazem, B Tribollet - New Jersey, 2008 - iopscience.iop.org
Electrochemical impedance spectroscopy Page 50 The Electrochemical Society Interface •
Summer 2019• www. electrochem. org 47 We are delighted to present this Interface issue …
Summer 2019• www. electrochem. org 47 We are delighted to present this Interface issue …
CPE analysis by local electrochemical impedance spectroscopy
Constant-phase elements (CPE) are used extensively in equivalent electrical circuits for
fitting of experimental impedance data. The CPE behavior is generally attributed to …
fitting of experimental impedance data. The CPE behavior is generally attributed to …
Influence of friction stir processing on the friction, wear and corrosion mechanisms of solid-state additively manufactured 316L duplex stainless steel
Friction stir processing (FSP) was employed as a post-surface processing technique to
modify the tribological and corrosion behavior of cold-sprayed (CS) 316L SS deposits …
modify the tribological and corrosion behavior of cold-sprayed (CS) 316L SS deposits …
Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5 wt.% sodium chloride solution
J Li, Q Jiang, H Sun, Y Li - Corrosion Science, 2016 - Elsevier
The as-cast, homogenized, and peak-aged AZ63 alloys are investigated via microstructure
observation, EDS analysis, hydrogen evolution, and electrochemical tests. The results …
observation, EDS analysis, hydrogen evolution, and electrochemical tests. The results …
Enhanced corrosion resistance of AZ91 magnesium alloy through refinement and homogenization of surface microstructure by friction stir processing
Friction stir processing (FSP) is applied to modify the surface microstructure of cast AZ91
magnesium alloy. The electrochemical and hydrogen evolution measurements reveal that …
magnesium alloy. The electrochemical and hydrogen evolution measurements reveal that …