Formation of M23C6 carbides and chromium-depleted zones in commercially available type
304L stainless steel were investigated by in situ transmission electron microscopy and …

Precipitation behavior of grain boundary (GB) M23C6 and its effect on tensile properties at
elevated temperature were investigated systematically in a Ni–Cr–W based superalloy. The …

Chromium carbides and intermetallic phases which form in industrial AISI 316L stainless
steel during ageing for up to 80000h between 550 and 650° C were identified by combining …

The effect of grain size on chromium carbide precipitation and sensitization of 316L stainless
steel was investigated based on inspection of microstructures and electrochemical …

In this study, the intergranular corrosion behavior of 310 S stainless steels after sensitizing at
different temperatures were investigated. The chemical content and the Volta potential …

Light metal alloys are extensively used in automotive, aerospace, aircraft, and military
sectors since their lightweight leads to reduced energy consumption, increased fuel …

The individual and synergistic effects of the microstructural features viz. grain size, residual
strain, grain boundary character distribution (GBCD) and its connectivity on intergranular …

In this paper, a SUS304/P92 dissimilar metal butt-welded joint was fabricated, and the
welding-induced sensitization of SUS304 austenitic stainless steel in this joint was …

The double loop electrochemical potentiokinetic reactivation (DL-EPR) test using an
electrolyte of 33 pct H 2 SO 4 solution with 0.3 pct HCl, at room temperature and at a …

Intergranular corrosion (IGC) susceptibility for Cr-Mn austenitic stainless steel and 304
austenitic stainless steel (ASS) was estimated using electrochemical techniques. Optical …