Numerical and experimental study of wire mesh in the swirl effervescent atomization

J Xie, L Liu, X Huo, X Liu, R Duan - Physics of Fluids, 2023 - pubs.aip.org
Effervescent atomization is widely used in industrial, agricultural, and national defense fields
because of its low energy consumption. Quality improvement to spray has been pursued for …

Numerical investigation of the impact of fuel temperature on spray characteristics in a pressure-swirl atomizer with spiral path

KK Aminjan, M Sedaghat, M Heidari… - Experimental and …, 2024 - Springer
In this study, a pressure-swirl device with a spiral path was designed, built, and tested at
various inlet pressures, and the experimental results were used to verify the accuracy of the …

Liquid sheet formation and spray characterization of N-heptane spray jet from a swirl atomizer: Numerical analysis and validation

Y Sun, CS Vegad, Y Li, L Dreßler, B Renou… - Physics of …, 2024 - pubs.aip.org
This paper analyzes the liquid atomization mechanisms of an N-heptane spray jet emerging
from a swirl simplex atomizer using numerical and experimental techniques. In particular, a …

An atomization model of air spraying using the volume-of-fluid method and large eddy simulation

Y Chen, S Chen, W Chen, J Hu, J Jiang - Coatings, 2021 - mdpi.com
When painting complex surfaces, such as large-curvature surfaces, poor coating quality is
often obtained, which may be caused by lack of an appropriate atomization model …

[PDF][PDF] Prototyping of an olfactory display supported by CFD simulations

M Rossoni, M Carulli, M Bordegoni… - CAD2022 …, 2022 - cad-journal.net
Olfactory Displays are devices used to generate and deliver scented air that is eventually
smelled by the users. As the literature reports, their development and evaluation mostly rely …

Experimental and Numerical Study on Inlet Pressure and Reynolds Number in Tangential Input Pressure-Swirl Atomizer

K Khani Aminjan, D Domiri Ganji - Arabian Journal for Science and …, 2025 - Springer
Tangential input pressure-swirl atomizers are frequently employed in the aerospace and
energy sectors. Previous studies have mainly focused on investigating the effects of …

[HTML][HTML] Расчёт характеристик течения жидкого топлива при его подаче через центробежные форсунки малоразмерных газотурбинных двигателей

НИ Гураков, ИА Зубрилин, ДВ Якушкин… - Вестник Самарского …, 2021 - cyberleninka.ru
Приведены результаты исследования характеристик течения жидкого топлива в
центробежных форсунках малоразмерных газотурбинных двигателей (ГТД) с …

Verification, validation, and accreditation for models and simulations in the Australian defence context: a review

KR Owen, RK Chakrabortty - The Journal of Defense …, 2024 - journals.sagepub.com
Building simulation models that are valid and credible is an enduring challenge in the
Australian Defence Organisation (ADO) context. Establishing validity and credibility can be …

A hybrid method for prediction the sauter mean diameter (D32) of kerosene sprays of pressure-swirl atomizers of small size gas turbine engines

NI Gurakov, SG Matveev, IA Zubrilin… - 2021 International …, 2021 - ieeexplore.ieee.org
The paper presents the creation and validation of a method for determining the Sauter mean
diameter (D32), which includes computational flow dynamics methods and semi-empirical …

Simulation of carbon monoxide emission during combustion of a liquid fuel injected by a pressure swirl atomizer into the combustion chamber

NI Gurakov, IA Zubrilin, OV Kolomzarov… - … , Explosion, and Shock …, 2023 - Springer
A method of calculating the characteristics of atomization of a liquid fuel by pressure swirl
atomizers for setting the boundary conditions of injection into the primary combustion area is …