As yet, Mg alloys acting as the medical implants have drawn extensive attention, due to their
spontaneous degradability, effective load-transmissibility and the excellent biocompatibility …

Biomedical materials may suffer from stress-induced corrosion when performing as implant
materials at load-bearing sites, bringing about variations in the microstructure, corrosion …

The effect of trace Ce addition on the microstructure evolution and corrosion behavior of
dilute Mg-0.6 Al-0.5 Mn-0.25 Ca-xCe (x= 0.1–0.3 wt%) alloys were investigated using …

Of the alloying additions to magnesium to date, Ta has not been widely studied. Herein, the
effect of Ta on the microstructure and corrosion of Mg-6.7 Y-2.5 Zn was investigated using …

The present study investigates the mechanical and in-vitro corrosion behavior of Mg-4Zn-0.5
Ca-0.8 Mn alloy in optimum homogenized conditions. The optimization of the …

Adopting twin-roll casting (TRC) technique, lean Mg-1.2 Zn-0.3 Ca-0.3 Al-xMn (x= 0.25, 0.38,
0.5 wt%) alloys with different Al/Mn ratio were prepared. The stoichiometric ratio of Al 8 Mn 5 …

Abstract Effect of Al on microstructure and corrosion behaviors of cast Mg-2Zn-xAl-0.5 Ca (x=
0, 0.5, 1.0, 2.0 wt%) alloys is investigated. The 0.5 Al specimen shows the lowest corrosion …

In this article, the pore and precipitation phases of A356 aluminum alloy were regulated by
adding element Cu, and the corrosion kinetic behavior was investigated by electrochemical …

Low strength and poor corrosion resistance are two long-standing bottlenecks with dilute Mg
alloys. Here, we report that the corrosion resistance of Mg-0.6 Al-0.5 Mn-0.2 Ca (wt.%) alloy …

The role of microstructural features on in-vitro degradation and surface film development of a
thermomechanically processed Mg-4Zn-0.5 Ca-0.8 Mn alloy has been investigated …