In this article, a model for tensile strength of polymer/clay nanocomposites (PCN) is
suggested assuming perfect and imperfect interfacial adhesion between the polymer matrix …

Asphaltene is often regarded as an undesirable by‐product of petroleum processing,
possesses vast reserves with little market value. The typical routes of consuming …

Various methods have been devoted to trigger the formation of multilayered structure for
wide range of applications. These methods are often complicated with low production …

The efficiency of a novel template-based approach for the dispersion of hydrophilic
nanoparticles within hydrophobic polymer matrices is investigated. The procedure …

Cross-linked thermoplastics represent an important class of materials for numerous
applications such as heat-shrinkable tubing, rotational molded parts, and polyolefin foams …

In this study, linear low density polyethylene (LLDPE) was grafted and crosslinked by
reactive extrusion melt compounding using different silane concentration with and without …

The adhesion of the polymer to ceramic nanoparticles is a key aspect in the manufacturing
of ceramic parts by additive manufacturing and injection molding, due to poor separation …

The aim of this study was the investigation of the use of modified talcum for supporting
crosslinking and as novel nucleating agent for physical foaming of polyethylene. For the …

Linear low density polyethylene (LLDPE) and low density polyethylene (LDPE) blend at
70/30 wt% ratio respectively was grafted and crosslinked with aluminum hydroxide (ATH) …

The effects of dicumyl peroxide/vinyltriethoxysilane treatment and nanoclay content were
investigated for low-density polyethylene (LDPE)/clay nanocomposites. LDPE was treated …