Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites
An epoxy matrix incorporated with hybrid multi-walled carbon nanotube (MWCNT) and
nanosilica was used to fabricate woven carbon fabric epoxy composites using vacuum …
nanosilica was used to fabricate woven carbon fabric epoxy composites using vacuum …
[HTML][HTML] Tensile modulus prediction of carbon nanotubes-reinforced nanocomposites by a combined model for dispersion and networking of nanoparticles
In this work, two models for the tensile modulus of composites and blends are joined,
assuming the dispersion and networking of carbon nanotubes (CNTs) and the interphases …
assuming the dispersion and networking of carbon nanotubes (CNTs) and the interphases …
[HTML][HTML] Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites
The influences of interphase regions on the percolation threshold and electrical conductivity
of nanocomposites polymer/carbon nanotubes (CNT) nanocomposites (PCNT) have been …
of nanocomposites polymer/carbon nanotubes (CNT) nanocomposites (PCNT) have been …
Hygrothermal degradation of MWCNT/epoxy brittle materials under I/II combined mode loading conditions: An experimental, micro structural and theoretical study
The effects of carboxylated multi-walled carbon nanotubes (MWCNTs) are studied
experimentally and theoretically on mixed-mode (I/II) fracture behavior of epoxy resin at the …
experimentally and theoretically on mixed-mode (I/II) fracture behavior of epoxy resin at the …
[HTML][HTML] Analysis of critical interfacial shear strength between polymer matrix and carbon nanotubes and its impact on the tensile strength of nanocomposites
This paper focuses on the critical interfacial shear strength (τ c) and interfacial shear
strength (τ) between polymer matrix and carbon nanotubes (CNT) in nanocomposites, which …
strength (τ) between polymer matrix and carbon nanotubes (CNT) in nanocomposites, which …
A modeling approach for young's modulus of interphase layers in polymer nanocomposites
In this work, the interphase in polymer nanocomposites is modeled as a multilayered part in
which the Young's modulus of each layer E k continuously changes from nanoparticle …
which the Young's modulus of each layer E k continuously changes from nanoparticle …
Study on the effects of the interphase region on the network properties in polymer carbon nanotube nanocomposites
The interphase region around nanoparticles changes the percolation threshold of long and
thin nanoparticles, such as carbon nanotubes (CNT) in polymer nanocomposites. In this …
thin nanoparticles, such as carbon nanotubes (CNT) in polymer nanocomposites. In this …
Temperature dependence of the shear strength in adhesively bonded joints reinforced with multi-walled carbon nanotubes
H Khoramishad, RS Ashofteh, M Mobasheri… - Engineering Fracture …, 2018 - Elsevier
In this paper, the temperature dependence of the strength of adhesively bonded shear lap
joint reinforced with multi-walled carbon nanotubes (MWCNTs) was studied. The results …
joint reinforced with multi-walled carbon nanotubes (MWCNTs) was studied. The results …
An experimental study on one-step and two-step foaming of natural rubber/silica nanocomposites
The curing and cellular structure of natural rubber (NR)/silica composite foams were
investigated. The presence of an activator in the rubber formulation significantly lowered the …
investigated. The presence of an activator in the rubber formulation significantly lowered the …
Simple model for hydrolytic degradation of poly (lactic acid)/poly (ethylene oxide)/carbon nanotubes nanobiosensor in neutral phosphate‐buffered saline solution
In this study, the hydrolytic degradation of poly (lactic acid)(PLA)/poly (ethylene oxide)(PEO)
blend and PLA/PEO/carbon nanotubes (CNTs) nanobiosensors in neutral phosphate …
blend and PLA/PEO/carbon nanotubes (CNTs) nanobiosensors in neutral phosphate …