Aqueous corrosion of aluminum-transition metal alloys composed of structurally complex phases: A review
L Ďuriška, I Černičková, P Priputen, M Palcut - Materials, 2021 - mdpi.com
Complex metallic alloys (CMAs) are materials composed of structurally complex intermetallic
phases (SCIPs). The SCIPs consist of large unit cells containing hundreds or even …
phases (SCIPs). The SCIPs consist of large unit cells containing hundreds or even …
Powder metallurgy of Al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: Analysis and modeling of mechanical properties
S Scudino, G Liu, M Sakaliyska, KB Surreddi, J Eckert - Acta Materialia, 2009 - Elsevier
In order to analyze the effectiveness of complex metallic alloys as reinforcing agents in metal
matrix composites, Al-based composites were synthesized by hot extrusion of elemental Al …
matrix composites, Al-based composites were synthesized by hot extrusion of elemental Al …
Structural and corrosion behavior investigation of novel nano-quasicrystalline Al-Cr-Fe reinforced Al-matrix composites produced by ARB process
In the present study, aluminum metal matrix composites (AMCs) reinforced with Al-Cr-Fe
quasicrystal (AlQC) nanoparticles (3 and 5 wt%) and monolithic Al were produced by the …
quasicrystal (AlQC) nanoparticles (3 and 5 wt%) and monolithic Al were produced by the …
A novel aluminum based nanocomposite with high strength and good ductility
H Ramezanalizadeh, M Emamy… - Journal of Alloys and …, 2015 - Elsevier
Aluminum based nanocomposite containing nano-sized Al 3 Mg 2 reinforcing was fabricated
via mechanical milling followed by hot extrusion techniques. For this, Al and Al 3 Mg 2 …
via mechanical milling followed by hot extrusion techniques. For this, Al and Al 3 Mg 2 …
Electrochemical characterization of rapidly solidified Al-(Cr, Cu, Ni, Y, Zr)-Fe alloys
K Młynarek-Żak, A Wierzbicka-Miernik… - Electrochimica …, 2022 - Elsevier
The aim of this work was to investigate the multiphase structure of new Al 71 (Cr, Cu, Ni, Y,
Zr) 24 Fe 5 and Al 65 (Cr, Cu, Ni, Y, Zr) 20 Fe 15 alloys, and the influence of chemical …
Zr) 24 Fe 5 and Al 65 (Cr, Cu, Ni, Y, Zr) 20 Fe 15 alloys, and the influence of chemical …
Passivation and localised corrosion susceptibility of new Al–Cr–Fe complex metallic alloys in acidic NaCl electrolytes
A Beni, N Ott, E Ura-Bińczyk, M Rasinski, B Bauer… - Electrochimica …, 2011 - Elsevier
Al-based complex metallic alloys (CMAs) are crystalline intermetallic phases characterised
by very complex crystal lattices, showing intriguing surface properties such as low wetting …
by very complex crystal lattices, showing intriguing surface properties such as low wetting …
STM and XPS investigation of the oxidation of the Al4 (Cr, Fe) quasicrystal approximant
JK Parle, A Beni, VR Dhanak, JA Smerdon… - Applied surface …, 2013 - Elsevier
The oxidation of the Al 4 (Cr, Fe) quasicrystal approximant has been studied using scanning
tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM data indicate …
tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM data indicate …
Detection of uric acid using colorimetric method based on iron-doped single-atom catalyst with peroxidase activity
J Rui, S Liu, J Chen, P Qiu, C Huang - Monatshefte für Chemie-Chemical …, 2024 - Springer
Single-atom catalysts (SACs) have garnered considerable attention owing to their
impeccable catalytic activity and unique ability to elucidate the active site. In this work, we …
impeccable catalytic activity and unique ability to elucidate the active site. In this work, we …
Wear Behavior of Al/CMA-Type Al3Mg2 Nanocomposites Fabricated by Mechanical Milling and Hot Extrusion
H Ramezanalizadeh, M Emamy… - Tribology …, 2016 - Taylor & Francis
In the current research, the wear behavior of an aluminum matrix nanocomposite material
prepared via mechanical milling and hot extrusion was investigated. The sample powders …
prepared via mechanical milling and hot extrusion was investigated. The sample powders …
Flow microcapillary plasma mass spectrometry-based investigation of new Al–Cr–Fe complex metallic alloy passivation
Abstract Al–Cr–Fe complex metallic alloys are new intermetallic phases with low surface
energy, low friction, and high corrosion resistance down to very low pH values (0–2). Flow …
energy, low friction, and high corrosion resistance down to very low pH values (0–2). Flow …