Porosity and permeability stress-sensitive behavior of sandstone is investigated through
porosity and permeability measurements under hydrostatic compression. An empirical …

This paper presents the results of a study on pressure buildup analysis of a vertically
fractured well with the consideration of stress-sensitive permeability and hysteresis effect in …

With the production of hydrocarbons from reservoirs, fractures will gradually close, resulting
in dynamic conductivities along the fracture. The main objective of this study is to develop a …

Summary Following the Cinco-Ley fracture model (Cinco-Ley et al.) and the Luo-Tang wing
model (Luo and Tang), we developed a new fracture‐unit model. By coupling the Fredholm …

Traditional stress sensitivity experiments are typically conducted under dry conditions,
without considering the reservoir's water content. In reality, the presence of water within …

Petroleum engineering reservoir parameter calculations are generally performed in the
absence of the overburden pressure effect. This leads to serious errors in further …

Multi-fractured horizontal well (MFHW) is commonly used in tight gas reservoirs to achieve
commercial development, and the created hydraulic fractures are irregularly distributed and …

With the extraction of hydrocarbons from reservoirs, fractures will gradually close and their
permeabilities will be reduced. Therefore, fracture conductivity will change dynamically …

In the literature, fracture conductivities are usually assumed as being constant in the
hydraulic fracture modeling. But in some cases the fracture conductivity that is a function of …

Pressure transient analysis (PTA) is one of the most robust and commonly interpretation
tools available for reservoir characterization. Common applications of PTA include …